Axixtech Strobe setup question?

Re:Axixtech Strobe setup question? (littlebigrancher)

Sun, 08 Nov 2009 17:42:37 GMT

no actually i was refering to the post above me but since you said something, can you refer me to a site for the axxitec lites.

Re:Axixtech Strobe setup question? (sfd_324)

Sun, 08 Nov 2009 17:23:50 GMT

littlebigrancher

are all the those water proof?

if your talking about my post......yes they are.

Re:Axixtech Strobe setup question? (littlebigrancher)

Sun, 08 Nov 2009 08:52:28 GMT

are all the those water proof?

Re:Axixtech Strobe setup question? (rancheres07)

Sun, 08 Nov 2009 00:23:16 GMT

If you want cheap light go to www.speedtechlights.com
Go to www.youtube.com/user/rancheres07 to see my four-wheeler with lights and a siren.
It cost around $100-200 bucks for waterproof strobes (A GOOD SET)

Re:Axixtech Strobe setup question? (suzuki14258)

Sat, 07 Nov 2009 11:19:23 GMT

FlybyGrizzly09

Nah, I'll just order the big good SLED4 from a website for $100 bucks and there already waterproof, and get me a water proof momentary switch and maybe a waterproof toggle switch, and some wire, and ill be good to go!

Are you paying 100bucks a piece? I got both of mine from here for 109 shiped. projectresponder . c o m

Re:Axixtech Strobe setup question? (suzuki14258)

Sat, 07 Nov 2009 11:17:02 GMT

I get my switches from oreilys, they have marine switches with a rubber boot you can get from them, i have 5 of them now and have had no problems with them. They usually have to order them. I just got a set of the axitechs, well ordered them

Re:Axixtech Strobe setup question? (sfd_324)

Sat, 07 Nov 2009 10:58:22 GMT

Here's 10 axixtech sled 4's on front of one of our 800's

http://www.youtube.com/user/sfd324#p/a/u/0/kaB9b3m6kKk

Re:Axixtech Strobe setup question? (Rakow03)

Mon, 02 Nov 2009 17:44:29 GMT

Save you money and get the axixtechs! They are just an overall a better light. This is a vid of the two axixtech extreme 6 diode leds. I also have a extreme 18 diode led on radiator but vid isnt working.

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=61151794

Re:Axixtech Strobe setup question? (FlybyGrizzly09)

Mon, 02 Nov 2009 15:48:19 GMT

Nah, I'll just order the big good SLED4 from a website for $100 bucks and there already waterproof, and get me a water proof momentary switch and maybe a waterproof toggle switch, and some wire, and ill be good to go!

Re:Axixtech Strobe setup question? (c.r.harmon)

Mon, 02 Nov 2009 08:45:55 GMT

Save some money, go to autozone, and get the strobes from there. i got some this weekend for $20 and there pretty bright. plus they come with a cotrol box for faster, slower, sepearate, or at the same time, and 3 flashes. it came with 4 strobes and the cotrol box is not waterproof *yet*

Re:Axixtech Strobe setup question? (FlybyGrizzly09)

Sun, 01 Nov 2009 19:35:09 GMT

Ill get a vid some time lol, I'm waiting on money to come in to my paypal before i order all my new stuff.

Re:Axixtech Strobe setup question? (bayoucats)

Sun, 01 Nov 2009 18:37:42 GMT

Run "+" POS from battery though a in line fuse for pertection, you will not need a very high amp fuse if you are running LED's only...
I run all of mine though a 3amp fuse...

as far as a switch, go to a marine/boat store and spend a little more for a water resistent switch.. You will be happer in the long run...

Post a vid when you get them installed...

Re:Axixtech Strobe setup question? (helmethair78)

Sun, 01 Nov 2009 17:46:55 GMT

Yeah, Run power from the battery to a switch then to the lights.

Re:Axixtech Strobe setup question? (FlybyGrizzly09)

Sun, 01 Nov 2009 13:09:57 GMT

you just run a toggle switch from the battery to the strobes to turn them off and on?

Re:Axixtech Strobe setup question? (helmethair78)

Sun, 01 Nov 2009 12:44:30 GMT

I run mine straight from the battery so I can have my strobes on with the ignition off.

Re:Axixtech Strobe setup question? (FlybyGrizzly09)

Sun, 01 Nov 2009 12:08:05 GMT

do i just run all the stuff off and from the battery?

Re:Axixtech Strobe setup question? (HONDA 4x4)

Sun, 01 Nov 2009 11:46:38 GMT

radio shak, walmart, etc. all they are is little toggle switches. the on switch connects your power to your auxillary telling the light to turn on. your momentary switch is just a toggle that will "momentarily" connect your flash pattern wire to either the ground or power wire. so youll turn your toggle switch on to turn on the light and to change patterns flip your momentary switch on then off within a couple seconds to change the pattern.

Re:Axixtech Strobe setup question? (FlybyGrizzly09)

Sun, 01 Nov 2009 11:10:22 GMT

where can i get the momentary switch and toggle to use with the LED?

Re:Axixtech Strobe setup question? (sfd_324)

Sun, 01 Nov 2009 10:24:22 GMT

Boxx3

You will need an on/off toggle switch and a momentary switch. I have both, the momentary switch is a push button type. This will control the patterns.

thats all, the flash patterns are built into the light.

Re:Axixtech Strobe setup question? (Boxx3)

Sun, 01 Nov 2009 09:09:13 GMT

You will need an on/off toggle switch and a momentary switch. I have both, the momentary switch is a push button type. This will control the patterns.

Re:Axixtech Strobe setup question? (mnyman)

Sun, 01 Nov 2009 01:44:42 GMT

As far as I know, you will need a switch. I want to know this too.

Axixtech Strobe setup question? (FlybyGrizzly09)

Sat, 31 Oct 2009 23:40:11 GMT

Alright, im new to the whole LED and Strobe setups. I was wondering what hardware i would need to run the the strobes. I wont to get the axixteck sled 4 or another one like that and i wanna be able to make the patterns change and where i can turn them off. What other stuff besides the LED would i have to buy to achieve this?

Thanks, cody, XDDD