Lockedmy 1st powerstearing project

Page: 123 > Showing page 1 of 3
Author
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
2013/04/06 11:35:44 (permalink)

my 1st powerstearing project

after rideing this

 at mud nats for a great 3 days. My left arm was so sore I couldn't hardly use it for a week.
made my mind up to find a powerstearing bike.
looking around on face book this pops up for $2500
and I already knew where another1 like it was that wrecked hard in front.
so heres the new project bike








2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#1

63 Replies Related Threads

    ford97
    Mud Pro
    • Total Posts : 1291
    • Reward points: 0
    • Joined: 2010/03/05 11:29:16
    • Location: statesboro GA
    • Status: offline
    Re:my 1st powerstearing project 2013/04/06 11:40:00 (permalink)
    looks kinda rough. lol. should be a good project


    2014 rzr 570
    -5in outkast
    -32 terms
    -snorkel
     
    06 big bear 400-SOLD
    2011 grizzly 700-SOLD
    2011 big bear 400-SOLD
    2010 rancher 420-SOLD
    99 big bear 350-SOLD
    #2
    qdw2008
    Mud Pro
    • Total Posts : 1183
    • Reward points: 0
    • Joined: 2009/12/31 16:45:01
    • Location: Sulphur Springs, TX
    • Status: offline
    Re:my 1st powerstearing project 2013/04/06 12:12:55 (permalink)
    what happened to that grizz?
    used and abused?
     
     

    ITS JUST MONEY
      09 sportsman 800
    29.5" laws on SS 212/2" lift (made by idk)/wild boar racked rad/moose racing filter/champion 2k/front an rear SATV bumpers/snya snorks modifieD

    Just ordered a wiesco programmer a KFI 3500lb stealth winch and building CUSTOM DUALLS >=)
    #3
    leed1315
    Mud Pro
    • Total Posts : 1721
    • Reward points: 0
    • Joined: 2008/05/25 22:39:12
    • Location: Hartselle, Alabama
    • Status: offline
    Re:my 1st powerstearing project 2013/04/06 13:02:38 (permalink)
    If you hasve trouble finding parts i have a nearly complete one left I'm parting out plus a lot of here and there stuff from others I've parted out. I've got about everything but a front differential and fenders left.

    Bikes
    07 400 Big Bear
    08 650 Prowler
    09 Polaris Sportsman 90
     I part bikes out on the side and have between 40-50 bikes on average. Feel free to ask me about parts if you need something.
    #4
    Mud lawdawg
    Respected Member
    • Total Posts : 3584
    • Reward points: 0
    • Joined: 2008/03/17 17:08:39
    • Location: Texas
    • Status: offline
    Re:my 1st powerstearing project 2013/04/06 19:16:56 (permalink)
    Hope you knew the person you got it from. If not have your local PD run the serial number

    Mine
    08  700 DU,
    29.5, 12" lift, HMF, ///, pc3, snork'd


    Wife's
    07 700 SE
    29.5 ,snork's, 2" lift,HMF, TMHP "Girl Power" Rad relocate, Clutch kit, Led's, Custom Radio 
    TMHP 
     
    #5
    Ole Nasty
    Mud Master
    • Total Posts : 944
    • Reward points: 0
    • Joined: 2011/01/18 20:14:49
    • Location: Jacksonville, Fl
    • Status: offline
    Re:my 1st powerstearing project 2013/04/06 19:47:17 (permalink)
    I like what you did to your 500, so I'm really gonna like what you do this grizzly.

     
    2011 Grizzly 700 EPS                  
    29.5" Highlifter Outlaws
    2mm Shim Mod
    EPI White Spring
    Snorkeled
    Wild Boar Radiator Re-locate
    2" Highlifter Lift
    Yamaha HD front bumper 
    2014 Polaris Ranger XP 800 
    All Stock
    Gone
    2005 Yamaha Rhino 660
    2009 Polaris Sportsman 500HO
       http://www.youtube.com/OleNasty79
    #6
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/04/06 23:13:38 (permalink)
    Mud lawdawg

    Hope you knew the person you got it from. If not have your local PD run the serial number

    very good advice
    I even got title and bill of sale




    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #7
    LiftedForeman
    Mud Master
    • Total Posts : 924
    • Reward points: 0
    • Joined: 2010/09/19 22:52:54
    • Location: Winnfield, Louisiana
    • Status: offline
    Re:my 1st powerstearing project 2013/04/06 23:37:16 (permalink)
    Nice score. Looks like someone rode the **** out of it tho lol

    2000 Foreman Fofiddy!
     Spring Spacers
     Center Paddle
     1.5" Spacers
     DynoJet Kit
     Clutch Kit
     Snorkle  
     29.5's
     2"lift
     GR 

    #8
    Expat_Dude
    Outlaw
    • Total Posts : 4363
    • Reward points: 0
    • Joined: 2005/05/09 14:18:27
    • Location: Brookhaven Mississippi/ Houston Texas
    • Status: offline
    Re:my 1st powerstearing project 2013/04/07 07:26:01 (permalink)
    Yup I know that bike, no worries about it being stolen.

    Lifetime Pro Staff Member

    2013 Ranger 900 Sunset red LE
    Summer tires - 30" sand vipers on 15" diesels
    Winter tires - 28" Radial Laws on chrome Kores
    4500# winch
    Polaris roof
    Lock and ride windshield, hardcoat
    Highlifter arched A arms
    Diver down snorkels
    Highlifter steering stop
    Rear DHT axles, 2" lift
    32" Cree front light bar
    12" Cree rear light bar

    Tow Rig- 2015 High Country Dmax
    Toys- 1970 Chevy SWB aka "Ughhh"
    1987 Grand National

    My Pics
    #9
    Mud lawdawg
    Respected Member
    • Total Posts : 3584
    • Reward points: 0
    • Joined: 2008/03/17 17:08:39
    • Location: Texas
    • Status: offline
    Re:my 1st powerstearing project 2013/04/07 08:22:19 (permalink)
    Good deal. Now get to rebuilding that bike.

    Mine
    08  700 DU,
    29.5, 12" lift, HMF, ///, pc3, snork'd


    Wife's
    07 700 SE
    29.5 ,snork's, 2" lift,HMF, TMHP "Girl Power" Rad relocate, Clutch kit, Led's, Custom Radio 
    TMHP 
     
    #10
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/01 19:05:42 (permalink)
    Been in California in chemical classes
    Now I can get to work
    To remove motor unbolt rear diff and slide every thing back
    Or unbolt front diff and go foward
    Or unbolt both


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #11
    redden3056
    Outlaw Extremist
    • Total Posts : 5252
    • Reward points: 0
    • Joined: 2006/12/26 16:04:32
    • Location: Winnfield, La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/01 19:09:09 (permalink)
    I've always unbolted the rear diff.  Once you get that shaft out, you can slide back, get front shaft out, then carry on.  Bet you can do it either way thou. 

    I own nothing.
    #12
    Solitude
    Respected Member
    • Total Posts : 9424
    • Reward points: 0
    • Joined: 2006/02/27 19:39:39
    • Location: Longview, Tx
    • Status: offline
    Re:my 1st powerstearing project 2013/05/01 19:09:31 (permalink)
    I would do the rear.

    Built RZR 800

    #13
    i want a 4wheeler
    Mud Monster
    • Total Posts : 409
    • Reward points: 0
    • Joined: 2011/02/02 15:50:50
    • Location: Near baton rouge, louisiana
    • Status: offline
    Re:my 1st powerstearing project 2013/05/01 19:23:11 (permalink)
    nice find

    Honda 300 4x4(Black and Orange)
    ~snorkel
    ~HMF
    ~54% GR
    ~3 inches of lift and 4 inch strech
    ~custom center paddle
    ~29.5 OUTLAW WIDES
    ~spool locker
    ~Jet kit
    ~floorboard
    ~carbon fiber clutches and after market pistons
    ~some other crap too
    ~~LOUD AND PROUD~~ 
     



    #14
    joshshoots01
    Mud Pro
    • Total Posts : 1945
    • Reward points: 0
    • Joined: 2011/12/08 22:28:28
    • Status: offline
    Re:my 1st powerstearing project 2013/05/01 20:46:17 (permalink)
    I was actually looking for this thread the other day wondering if you made any progress. I'm looking forward to seeing the finished product!

    15 rzr 1000/33 terms/5"lift/adrenaline snorkels/
    2010 outty 400/ crushed sycotrax/ little motor work/cv tech/stm/adrenaline snorkels/
    2009 renegade 800/ motor work/ crushed 32's/clutches/ 
    cams/adrenaline snorkels/
    2015 xmr 1000/crushed 32's/cv tech/stm/  


    #84 adrenaline racing
    #15
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 20:40:00 (permalink)

    had fits getting the triangle snorkel kit off

    not sure I like the way this is done

     


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #16
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 20:41:45 (permalink)

    good start

     


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #17
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 20:43:38 (permalink)
     

    howcome 1 of these motors has a hose and the other doesnt


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #18
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 20:44:46 (permalink)
     
    motor is running in this pic
     


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #19
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 20:54:34 (permalink)

    this hose that comes off side of throddlebody
    just hangs down with a open end


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #20
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 20:58:12 (permalink)
     


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #21
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 21:00:05 (permalink)
     
    got closer
     


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #22
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 21:05:09 (permalink)

    got it together and took it to cootervill for a test run
    after that 1st run
    all 4 brake pads
    and 1 cv boot

     


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #23
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 21:07:58 (permalink)
    added lift kit and went to goldonna to ride railroad track for 1st time






    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #24
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 21:11:47 (permalink)
    added some 26 inch swamplites off a junk 420

    back to cooterville for more testing
     


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #25
    rajunxcajun55
    Mud Pro
    • Total Posts : 1267
    • Reward points: 0
    • Joined: 2010/12/07 19:35:49
    • Location: Dequincy, LA
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 21:14:31 (permalink)
    It looks good!

    1996 Honda Foreman 400
    450 suspension, 30" silverbacks, 2" wheel spacers, glasspack, snorkel, uni airfilter, light bar, custom system, big ole yeti, LEDs, start in gear mod, reverse lever delete, motor work, ect.
    Gone
    2008 Rancher 420
    2006 Brute 750
    2003 Grizzly 660
    2001 Rancher 350
    2004 300ex
    #26
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 21:16:47 (permalink)
    since Yamaha clutching is as bad as can am clutching
    I started by machining my roller groves deeper
    some used 16gram greaseless rollers
    that someone greased

     


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #27
    mud PRO 700
    Super Swamper
    • Total Posts : 2793
    • Reward points: 0
    • Joined: 2011/09/14 19:55:19
    • Location: Pineville Louisiana
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 21:17:02 (permalink)
    Great progress!! Why not add a power steering unit to the sportsman??


    2009 Can-am outlander XT
    #28
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 21:22:42 (permalink)
    sold swamp lites back on stocks
    and back to goldonna for 88 more miles of testing
    I now top out at 62 mph after 16 gram rollers and machined sheve
    bike would run 65 before





     


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #29
    BridelessRacing
    Respected Member
    • Total Posts : 6083
    • Reward points: 0
    • Joined: 2006/02/23 19:04:57
    • Location: start La
    • Status: offline
    Re:my 1st powerstearing project 2013/05/23 21:25:18 (permalink)
    got my s/w 30 inch zillas mounted on rims
    and my white epi spring is in
    Marengo is 8 days from now
    that's more testing


    2009 Yamaha griz eps project underway
    http://forum.highlifter.com/m4888660.aspx
    Don Oglesby on facebook

    http://forum.highlifter.com/hooptie-3-m4910341.aspx
    usefull
    http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
    http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
    [link=http://forum.highlifter.com/kids-tire-true-mud-tire
    420 gr
    [link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
    #30
    Page: 123 > Showing page 1 of 3
    Jump to:
    © 2019 APG vNext Commercial Version 5.5