Lockedtire sizes for rzr 800

Post
redbrutejr
Puddle Jumper
2011/12/18 21:07:46
 i was wondering if anybody running the same size tire that goes on front and putting them on the back and what is the advantage of running 10 on front and back, i am going to put the 5 inch lift from super atv and i was thinking of running 28 mudlites on 14 inch wheels, thanks
chris0255
Mud Maniac
Re:tire sizes for rzr 800 2011/12/18 22:33:05
Im running a 2 inch lift with 28x9x14 zillas on all corners with no problems
TeamMudd
Outlaw
Re:tire sizes for rzr 800 2011/12/19 19:15:20
with a 5" lift the tire size is only limited to what kind of tire you want on it.  there's a couple pics in the lifted rzr thread with a 5" with 32's and GOBS of clearance.
 
i have a 2" bracket lift (not sure on brand/type), with 30" zillas.  i had the tires from a previous atv so i did some fabricating to fit the rears.  i'm running 30x9 fronts (with modified floorboards), and 30x11 rears (with a modified engine mount).
ROKNOUT
Mud Pro
Re:tire sizes for rzr 800 2011/12/19 23:54:59
3" SUPERATV on 31x9.5's
BUSHHOG
Employee
Re:tire sizes for rzr 800 2011/12/20 08:29:13
redbrutejr, as several folks have told you, you can run any front to back size you want with that lift. On side x sides I recommend skinny/wides for most applications. Also why are you running a tire like a Mudlite with a 5" lift ? If you plan to mud ride at all, you might want to consider a tire that will really do good in bad mud. If you would like to chat about tires, please give me a call at (800) 699-0947, ext. 6038. Thanks !!!
MDS2106
Mud Bogger
Re:tire sizes for rzr 800 2011/12/20 23:08:52
TeamMudd

with a 5" lift the tire size is only limited to what kind of tire you want on it.  there's a couple pics in the lifted rzr thread with a 5" with 32's and GOBS of clearance.

i have a 2" bracket lift (not sure on brand/type), with 30" zillas.  i had the tires from a previous atv so i did some fabricating to fit the rears.  i'm running 30x9 fronts (with modified floorboards), and 30x11 rears (with a modified engine mount).

 
What type of mod did you do on the motor mount? I am wanting to run some wides on the back and its looks like they will rub.
TeamMudd
Outlaw
Re:tire sizes for rzr 800 2011/12/20 23:32:26
you'll have to shave some of the corner off, and i drilled one of the holes out that's next to the factory mounting bolt, installed a new bolt and lock nut.  i actually ground some more off since this pic, as well as put an 1/8" spacer between the frame and the engine mounting bracket (need current pics). 
 
all this together made room for the 30x11's for the rear.  when i lift it up on the jack, at full extension, there's about 1/8-1/4" between the tallest lug and the engine mount bolt to the rear.
 
http://www.team-mudd-raci...MG_20111203_114424.jpg
http://www.team-mudd-raci...MG_20111203_114432.jpg
http://www.team-mudd-raci...MG_20111203_114440.jpg
redbrutejr
Puddle Jumper
Re:tire sizes for rzr 800 2011/12/21 12:45:04
i a have ran mudlites on all my atvs and i like them and they do pretty good, the only reason i got the 5 inch was for wider stant and ground clearance and i am not a heavy mud rider i do ride in little mud but not bad mud
 
MDS2106
Mud Bogger
Re:tire sizes for rzr 800 2011/12/21 12:45:38
Thanks,Teammudd. You running any wheel spacers??
 
Sorry Redbrutejr last question, no more hijack
post edited by MDS2106 - 2011/12/21 12:55:03
TeamMudd
Outlaw
Re:tire sizes for rzr 800 2011/12/21 16:31:43
no wheel spacers.  i'm running ss312 that are 5+2 fronts, and 5+3 rears
 
ok no more hijacking, lol!  if you have any other questions feel free to PM me.
littlebigrancher
Outlaw Extremist
Re:tire sizes for rzr 800 2011/12/21 16:33:43
im sorry but a 5" lifted razr on some 28 mudlites is gonna look about retarded bro. i would at least step to some 29.5 terms or 30 radials. those two tires ride smooth as glass and arent too hard on parts. you gotta fill up the wheel wheels somewhat with a big lift like that