Axixtech Strobe setup question?

Alright, im new to the whole LED and Strobe setups. I was wondering what hardware i would need to run the the strobes. I wont to get the axixteck sled 4 or another one like that and i wanna be able to make the patterns change and where i can turn them off. What other stuff besides the LED would i have to buy to achieve this?

Thanks, cody, XDDD

As far as I know, you will need a switch. I want to know this too.

2007 Honda Rancher 4x4 ES + junk

http://i38.tinypic.com/2920bnq.jpg

"If you can read this, thank a teacher. If you can't, thank a teacher's union." ----Glenn Beck, Arguing With Idiots

You will need an on/off toggle switch and a momentary switch.  I have both, the momentary switch is a push button type.  This will control the patterns.

2007 Black Foreman 500
28"outlaws on Douglas Spyder
hmf exhaust
dyno jet kit
Clutch Kit
2" hl lift kit
k&n filter
Triangle snorkle
custom beer holder
aluminum product stick stoppers, front skid plate with Viper 3500 max and bottom skid plate
Custom stereo with 8 inch bazookas and Ipod holder
LED's

Boxx3


You will need an on/off toggle switch and a momentary switch.  I have both, the momentary switch is a push button type.  This will control the patterns.

thats all, the flash patterns are built into the light.

08 800 Stealth.....2" RDC lift, 29.5's on 312's, HD front springs, Ammo Cans, Rear Rack Plate, Wet Bar, Backrest,  Warn RT30, & Blink Blink's.

TRIANGLE STEREO FOR SALE....... $1100.00 tyd!

http://s429.photobucket.com/albums/qq19/sfd_324/

where can i get the momentary switch and toggle to use with the LED?

radio shak, walmart, etc. all they are is little toggle switches. the on switch connects your power to your auxillary telling the light to turn on. your momentary switch is just a toggle that will "momentarily" connect your flash pattern wire to either the ground or power wire. so youll turn your toggle switch on to turn on the light and to change patterns flip your momentary switch on then off within a couple seconds to change the pattern.

do i just run all the stuff off and from the battery?

I run mine straight from the battery so I can have my strobes on with the ignition off.

05 Sportsman 700 EFI
Power Commander
800 header LRD Torc
HD Front Springs
2" lift
Gorillas
28" Zilla 
K&N
Fully Snorkeled
3 head lite mod HID's
2500 Warn winch Amsteel blue rope  
Heel Clicker
Stick Stopper
HL forward A-arms
Axixtech strobes

PICKET SIGN " VOTE NO for MEXICO! PLEASE keep the POLARIS ATV's assembly here in the U.S.A!"

you just run a toggle switch from the battery to the strobes to turn them off and on?

Yeah, Run power from the battery to a switch then to the lights.

05 Sportsman 700 EFI
Power Commander
800 header LRD Torc
HD Front Springs
2" lift
Gorillas
28" Zilla 
K&N
Fully Snorkeled
3 head lite mod HID's
2500 Warn winch Amsteel blue rope  
Heel Clicker
Stick Stopper
HL forward A-arms
Axixtech strobes

PICKET SIGN " VOTE NO for MEXICO! PLEASE keep the POLARIS ATV's assembly here in the U.S.A!"

Run "+" POS from battery though a in line fuse for pertection, you will not need a very high amp fuse if you are running LED's only...
I run all of mine though a 3amp fuse...

as far as a switch, go to a marine/boat store and spend a little more for a water resistent switch.. You will be happer in the long run...

Post a vid when you get them installed...   

Ill get a vid some time lol, I'm waiting on money to come in to my paypal before i order all my new stuff.

Save some money, go to autozone, and get the strobes from there. i got some this weekend for $20 and there pretty bright. plus they come with a cotrol box for faster, slower, sepearate, or at the same time, and 3 flashes. it came with 4 strobes and the cotrol box is not waterproof *yet*

Nah, I'll just order the big good SLED4 from a website for $100 bucks and there already waterproof, and get me a water proof momentary switch and maybe a waterproof toggle switch, and some wire, and ill be good to go!

The Monster:


Kodiak 450
HMF
2" Lift
HL Springs
Snorkels
Rad Reloc.
Clutch Kit
Dyno Jets
Uni Filter


Lots more.

Save you money and get the axixtechs! They are just an overall a better light. This is a vid of the two axixtech extreme 6 diode leds. I also have a extreme 18 diode led on radiator but vid isnt working.

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=61151794

2005 Kawasaki Brute Force 750        

14" SS212 Wheels
30" Silverbacks
Intake and exhaust snorkles
HMF Full Exhaust
Highlifter chip
2" Lift
Jet kit 
K&N filter
HD clutch kit
Triple flow radiator
Temp gauge
Warn front bumper w/ lights
Warn 2.5rt winchs at front and rear
2 Axixtech 6 diode led lights
1 Axixtech 18 diode led light 
Strobes in headlights 

 

 
Here's 10 axixtech sled 4's on front of one of our 800's
 
http://www.youtube.com/user/sfd324#p/a/u/0/kaB9b3m6kKk

08 800 Stealth.....2" RDC lift, 29.5's on 312's, HD front springs, Ammo Cans, Rear Rack Plate, Wet Bar, Backrest,  Warn RT30, & Blink Blink's.

TRIANGLE STEREO FOR SALE....... $1100.00 tyd!

http://s429.photobucket.com/albums/qq19/sfd_324/

I get my switches from oreilys, they have marine switches with a rubber boot you can get from them, i have 5 of them now and have had no problems with them. They usually have to order them. I just got a set of the axitechs, well ordered them

09 POLARIS 850 xp
Pure Polaris Front and Rear bumper
Polaris 3500 pound rope winch
Axitech Lx4 lights
Pure Polaris Head Light Bulbs
System
K&N filter
Winch saver
15 inch platinum ss 212 wheels/ 28 inch bf goodrich km2s

The Trucks are Fords and the Tractor is Green.

H-town offroad supporter

FlybyGrizzly09


Nah, I'll just order the big good SLED4 from a website for $100 bucks and there already waterproof, and get me a water proof momentary switch and maybe a waterproof toggle switch, and some wire, and ill be good to go!

Are you paying 100bucks a piece? I got both of mine from here for 109 shiped. projectresponder . c o m

09 POLARIS 850 xp
Pure Polaris Front and Rear bumper
Polaris 3500 pound rope winch
Axitech Lx4 lights
Pure Polaris Head Light Bulbs
System
K&N filter
Winch saver
15 inch platinum ss 212 wheels/ 28 inch bf goodrich km2s

The Trucks are Fords and the Tractor is Green.

H-town offroad supporter

If you want cheap light go to www.speedtechlights.com
Go to www.youtube.com/user/rancheres07 to see my four-wheeler with lights and a siren.
It cost around $100-200 bucks for waterproof strobes (A GOOD SET)

This is my Honda Rancher:
Make: Honda
Model: Rancher
Year: 2007
Color: Blue
Other: Electric Shift
Accessories:
 Front Amber Strobes
 Rear Amber Strobes 
 Left and Right Alley Lights
 100 Watt Siren-Wail, Wail 2, Yelp, Yelp 2, and Airhorn.
 2 Public Address Systems
 CB Radio
 Spotlight
 Cooler
 Passenger Seat
 Gas Tank Pack
 Vehicle Work Light (10 Foot)
 Trunk Cargo Light
This is my Emergency Responce ATV.

are all the those water proof?

07 rancher 420 , 29.5 skinnys laws, 12" douglas rattlesnakes, HMF slip on, HL 2" lift, snorked front to back, ammo cans, UNI filter, HL springs, EPI clutch kit, RAD RACKED!

ATV WORKS 
Just Plain Nasty Motorsports 
Diahrea Slingers ATV Club!      
MIDNIGHT MUDRIDERS
"WORK ALL DAY TO RIDE ALL NIGHT"
                  

littlebigrancher


are all the those water proof?

if your talking about my post......yes they are.

08 800 Stealth.....2" RDC lift, 29.5's on 312's, HD front springs, Ammo Cans, Rear Rack Plate, Wet Bar, Backrest,  Warn RT30, & Blink Blink's.

TRIANGLE STEREO FOR SALE....... $1100.00 tyd!

http://s429.photobucket.com/albums/qq19/sfd_324/

no actually i was refering to the post above me but since you said something, can you refer me to a site for the axxitec lites.

07 rancher 420 , 29.5 skinnys laws, 12" douglas rattlesnakes, HMF slip on, HL 2" lift, snorked front to back, ammo cans, UNI filter, HL springs, EPI clutch kit, RAD RACKED!

ATV WORKS 
Just Plain Nasty Motorsports 
Diahrea Slingers ATV Club!      
MIDNIGHT MUDRIDERS
"WORK ALL DAY TO RIDE ALL NIGHT"