Helpful ReplyHot!The little 300 that could.

Page: < 12345 > Showing page 4 of 5
Author
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2017/01/12 22:09:42 (permalink)
i should have 4 to 7 4x4 frames


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#91
forzainformer
Grass Hog
  • Total Posts : 3
  • Reward points: 0
  • Joined: 2017/01/12 18:50:05
  • Status: offline
The little 300 that could. 2017/01/13 05:27:09 (permalink)
BridelessRacing

i should have 4 to 7 4x4 frames




How much would one cost me?
I dont have $$$ at the moment.


Sent from my iPhone using Tapatalk
#92
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/13 14:25:34 (permalink)

Only spray paint for the moment but got tired of the Mexican jokes so this will do for the ride this weekend 😝


Sent from my iPhone using Tapatalk
#93
00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: The little 300 that could. 2017/01/13 19:57:01 (permalink)
Not to bad on the rattle can job homie!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#94
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/13 20:28:02 (permalink)
Thank ya sir I'm something like a professional


Sent from my iPhone using Tapatalk
#95
00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: The little 300 that could. 2017/01/13 20:50:02 (permalink)
Hahahahahahahahahahahahahahahahahahahaha

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#96
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: The little 300 that could. 2017/01/13 22:45:43 (permalink)
The bike is looking good. You just use regular rattle can paint?

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#97
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/14 09:27:35 (permalink)
Yes sir sand 80 grit wipe with acetone, 120 grit wipe, 220 wipe, then spray https://vimeo.com/199455355 this thing is bad ****


Sent from my iPhone using Tapatalk
#98
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/14 18:08:31 (permalink)
https://vimeo.com/199495316
Should of named it the beast


Sent from my iPhone using Tapatalk
#99
Lance103
Trail Rider
  • Total Posts : 75
  • Reward points: 0
  • Joined: 2014/01/03 01:11:37
  • Status: offline
Re: The little 300 that could. 2017/01/16 22:15:13 (permalink)
Man that thing is sick. What's the 4.0 gears your talking about? Like front and rear final drive ring and pinion change?

"If I can't buy it for $1000 or less and fix it up, I don't want it"
1988 Fourtrax 300 4x4 $900
1994 Fourtrax 300 4x4 $460
1999 Foreman 450 4x4 $800
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/16 22:50:55 (permalink)
Yes final drive. just pinion change. Ring will stay the same.. it has 3.6 right now


Sent from my iPhone using Tapatalk
CHEVYLUV80
Mud Maniac
  • Total Posts : 276
  • Reward points: 0
  • Joined: 2009/03/02 10:11:06
  • Location: Benson, NC
  • Status: offline
Re: The little 300 that could. 2017/01/18 07:13:40 (permalink)
This is a cool build! Nice Job! Could you tell more about the t-case gears? Or is it top secret lol.

'95 Honda 300
29.5 Laws / XL2's
Spool / 54% GR / Clutch Kit
Snorkel / 2'' Lift / Spring Spacers

Harley Pipe / Floorboards 
 
'85 Honda Big Red
Under Construction / 300 Engine
28x12 Mud Zillas-Rear / Lifted
 
  
'04 Honda Rancher 350 4x4es 
27x9x11 / 27x12 x11 TSL
2'' Lift / Skull Handgrips   

TEAM WOO POW
 







Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/18 07:34:27 (permalink)
No not top secret at all bud, I'm not that type of guy lol. I just wanted to test it and make sure it was going to work before everyone blasted my idea. Now that I know it works. It's all yours
I ended up taking the tensioner completely out, the chain wasn't that much to loose without


Sent from my iPhone using Tapatalk
CHEVYLUV80
Mud Maniac
  • Total Posts : 276
  • Reward points: 0
  • Joined: 2009/03/02 10:11:06
  • Location: Benson, NC
  • Status: offline
Re: The little 300 that could. 2017/01/18 07:45:23 (permalink)
I was not expecting to see a chain. I like that. I was wanting to run a kitty front diff in my 300 for the diff lock. looks like its too big to fit without modding the bottom of the frame like you did

'95 Honda 300
29.5 Laws / XL2's
Spool / 54% GR / Clutch Kit
Snorkel / 2'' Lift / Spring Spacers

Harley Pipe / Floorboards 
 
'85 Honda Big Red
Under Construction / 300 Engine
28x12 Mud Zillas-Rear / Lifted
 
  
'04 Honda Rancher 350 4x4es 
27x9x11 / 27x12 x11 TSL
2'' Lift / Skull Handgrips   

TEAM WOO POW
 







Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/18 07:50:35 (permalink)
Yea idk if it would fit without redoing the bottom of frame, which you would also have to redo the lower a arms


Sent from my iPhone using Tapatalk
CHEVYLUV80
Mud Maniac
  • Total Posts : 276
  • Reward points: 0
  • Joined: 2009/03/02 10:11:06
  • Location: Benson, NC
  • Status: offline
Re: The little 300 that could. 2017/01/18 07:53:46 (permalink)
I'm going to look into it. I was planning on building a new lift anyway. I'm getting tired of the spool.

'95 Honda 300
29.5 Laws / XL2's
Spool / 54% GR / Clutch Kit
Snorkel / 2'' Lift / Spring Spacers

Harley Pipe / Floorboards 
 
'85 Honda Big Red
Under Construction / 300 Engine
28x12 Mud Zillas-Rear / Lifted
 
  
'04 Honda Rancher 350 4x4es 
27x9x11 / 27x12 x11 TSL
2'' Lift / Skull Handgrips   

TEAM WOO POW
 







Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/18 10:03:27 (permalink)
Gonna need custom tie rods to be able to get up and over the 4x4 Electric actuator


Sent from my iPhone using Tapatalk
CHEVYLUV80
Mud Maniac
  • Total Posts : 276
  • Reward points: 0
  • Joined: 2009/03/02 10:11:06
  • Location: Benson, NC
  • Status: offline
Re: The little 300 that could. 2017/01/18 12:01:42 (permalink)
I got heim joints on it now. I was going to convert it to manual 4x4 if I do it.
 

'95 Honda 300
29.5 Laws / XL2's
Spool / 54% GR / Clutch Kit
Snorkel / 2'' Lift / Spring Spacers

Harley Pipe / Floorboards 
 
'85 Honda Big Red
Under Construction / 300 Engine
28x12 Mud Zillas-Rear / Lifted
 
  
'04 Honda Rancher 350 4x4es 
27x9x11 / 27x12 x11 TSL
2'' Lift / Skull Handgrips   

TEAM WOO POW
 







Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/18 17:19:09 (permalink)
Ah ten four sounds like you got the right plan


Sent from my iPhone using Tapatalk
Lance103
Trail Rider
  • Total Posts : 75
  • Reward points: 0
  • Joined: 2014/01/03 01:11:37
  • Status: offline
Re: The little 300 that could. 2017/01/19 01:18:07 (permalink)
Say, what did you do for the rear driveshaft? I'm going to build a big lift on my 300 sometime this year although it may not be an IRS I couldn't help but noticed the driveshaft you had made(a few pages back), although may have had the same angles on the u joints?, it defiantly wasn't in phase by the way you welded those yokes 90* off from each other. Even if the operating angles are correct a driveshaft out of phase is still going to rotate at a non constant velocity. This is probably what gave you that bucking/binding and wanting to kick the driveshaft off those splines? Anyone agree?

"If I can't buy it for $1000 or less and fix it up, I don't want it"
1988 Fourtrax 300 4x4 $900
1994 Fourtrax 300 4x4 $460
1999 Foreman 450 4x4 $800
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/19 06:08:38 (permalink)
Yes I agree. The drive shaft with the u joints was just tacked up like that, never ran other than on the jack stands. The new drive shAft I made is cv shaft drive shaft


Sent from my iPhone using Tapatalk
00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: The little 300 that could. 2017/01/19 08:28:01 (permalink)
I like the cv shaft setup. 

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/19 09:29:36 (permalink)
Thank you


Sent from my iPhone using Tapatalk
00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: The little 300 that could. 2017/01/19 09:58:20 (permalink)
I was talking to Whitney yesterday about how your bike is turning out. You did good homie!!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/19 10:53:16 (permalink)
Thanks man im sure proud of it, Whitney was a bunch of help with the build too.


Sent from my iPhone using Tapatalk
Lance103
Trail Rider
  • Total Posts : 75
  • Reward points: 0
  • Joined: 2014/01/03 01:11:37
  • Status: offline
Re: The little 300 that could. 2017/01/19 11:49:29 (permalink)
Nice, you gonna take that thing to mud nats or mudfest this year?

"If I can't buy it for $1000 or less and fix it up, I don't want it"
1988 Fourtrax 300 4x4 $900
1994 Fourtrax 300 4x4 $460
1999 Foreman 450 4x4 $800
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/19 15:14:28 (permalink)
We are making the trip for mud nationals, I've got a lot of work to get done on it from now untill then but I'm up for it


Sent from my iPhone using Tapatalk
00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: The little 300 that could. 2017/01/19 17:10:08 (permalink)
I wish I could find the time to get mine done. Whitney said he's gonna come pick it up and finish it since its taking me so long!!! 

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2017/01/19 22:08:09 (permalink)
yaull both look me up at nats
 


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: The little 300 that could. 2017/01/19 23:05:18 (permalink)
Brideless I wouldn't mind riding with y'all. Always looks like y'all have a good time.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Page: < 12345 > Showing page 4 of 5
Jump to:
© 2017 APG vNext Commercial Version 5.5