Helpful ReplyHot!The little 300 that could.

Page: < 12345 > Showing page 3 of 5
Author
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/20 16:07:16 (permalink)
Wont this work just the same?




Sent from my iPhone using Tapatalk
#61
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2016/12/20 19:18:45 (permalink)
yes that will work also


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#62
00_NUTT
Super Swamper
  • Total Posts : 2085
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/20 19:54:07 (permalink)
Hey brideless on the bearing you posted does it have one or two bearings in its housing. I really like that one. Gives me some ideas for other projects I have.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#63
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2016/12/20 22:07:56 (permalink)
the housing could be machined for 1 or 2 bearings
 


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#64
00_NUTT
Super Swamper
  • Total Posts : 2085
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/20 22:13:59 (permalink)
That's good to know. Thanks

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#65
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/29 08:26:42 (permalink)
Well I haven't died in case anyone was wondering lol.
Been tied up with holiday stuff and a custom scooter project for a customer. Finally got a little time to get some work in on the front end.
Got the front diff mounted, the frame flattened out, still got a lot of gusseting to do and some fancy design work but glad to have that diff mounted.
Got the metal snorkel pipe plumbed and everything mounted as well.
Not happy with the front axles. Maxed out will only do 30* angle. (The rear is set at 30) made a call and got a set of axles on the way so I'm going to build the front at 30 then just throw the new axles in when they get here.
Headed to pick up the front knuckles and hubs today, pillow block bearing should be here tomorrow, gonna tear transfer case back apart and add a little more beaf to it because I had a dream of it exploding on a ride 😂 and nothing worse to ruin a good buzz like a broke bike.. but all in all maybe this thing will be on it's own 4 feet rolling into the new year!




Sent from my iPhone using Tapatalk
#66
00_NUTT
Super Swamper
  • Total Posts : 2085
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/29 11:51:04 (permalink)
Nice. Which axles are those?

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#67
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/29 12:56:15 (permalink)
Prowler


Sent from my iPhone using Tapatalk
#68
00_NUTT
Super Swamper
  • Total Posts : 2085
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/29 18:23:57 (permalink)
Must be how the cups are made. My gorillas and Turner's never had a problem getting over 30 degrees.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#69
00_NUTT
Super Swamper
  • Total Posts : 2085
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/29 18:23:57 (permalink)
Must be how the cups are made. My gorillas and Turner's never had a problem getting over 30 degrees.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#70
00_NUTT
Super Swamper
  • Total Posts : 2085
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/29 18:23:57 (permalink)
Must be how the cups are made. My gorillas and Turner's never had a problem getting over 30 degrees.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#71
00_NUTT
Super Swamper
  • Total Posts : 2085
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/29 18:23:57 (permalink)
Must be how the cups are made. My gorillas and Turner's never had a problem getting over 30 degrees.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#72
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/29 18:35:58 (permalink)
Yea I agree.. got a set coming to fix that problem. Just gonna build on untill they arrive


Sent from my iPhone using Tapatalk
#73
00_NUTT
Super Swamper
  • Total Posts : 2085
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/29 19:19:40 (permalink)
Holy cr ap my kindle glitched on that post!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#74
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/30 00:53:10 (permalink)
lol I figured something happened


Sent from my iPhone using Tapatalk
#75
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/01 07:15:22 (permalink)
Got her sitting on all 4 thankfully! Still got a lot to do and I think the 35 bkt and 18 battles will set it off nice.



Sent from my iPhone using Tapatalk
#76
Rebel Redneck
Mud Bogger
  • Total Posts : 183
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: The little 300 that could. 2017/01/01 07:31:03 (permalink)
Looks great. You've definitely put in some work

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#77
00_NUTT
Super Swamper
  • Total Posts : 2085
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2017/01/01 08:31:41 (permalink)
I second what Rendell said. Looks good homie. Yea with the tire rim combo you picked it should look sick!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#78
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2017/01/01 18:24:08 (permalink)
looks good


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#79
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/08 19:56:42 (permalink)
Froze to death but had a dang good test and tune on the bike. Ended up breaking a weld on rear drive shaft where the plate was welded to the diff that somehow got over looked. But all in all I'm really proud of it
https://vimeo.com/198619363
https://vimeo.com/198619530


Sent from my iPhone using Tapatalk
#80
Rebel Redneck
Mud Bogger
  • Total Posts : 183
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: The little 300 that could. 2017/01/08 20:13:52 (permalink)
Looks like y'all had a great time and the bike looks great. Very nice work

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#81
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2017/01/08 21:58:29 (permalink)
love the carnage video. 
should be easy fix
 


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#82
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/09 12:24:03 (permalink)
Thanks guys, it shouldn't be much to fix


Sent from my iPhone using Tapatalk
#83
Lance103
Trail Rider
  • Total Posts : 75
  • Reward points: 0
  • Joined: 2014/01/03 01:11:37
  • Status: offline
Re: The little 300 that could. 2017/01/09 14:46:45 (permalink)
Just watched those 2 videos that thing is nasty! Gonna look awesome when you finish painting everything

"If I can't buy it for $1000 or less and fix it up, I don't want it"
1988 Fourtrax 300 4x4 $900
1994 Fourtrax 300 4x4 $460
1999 Foreman 450 4x4 $800
#84
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/09 16:19:48 (permalink)
Thanks a lot I'm very pleased with it. Ready to put the 4.0 gears in it and throw the bkts on it and see how she does


Sent from my iPhone using Tapatalk
#85
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/12 16:26:19 (permalink)
https://vimeo.com/199235999
Finally got him off in the first hole on his new toy. Gonna let him ride it a little while then start tearing it down for powder and Hydrodip in a Mth or so. Guess now it's time to build me something... hmmm any ideas?


Sent from my iPhone using Tapatalk
#86
forzainformer
Grass Hog
  • Total Posts : 3
  • Reward points: 0
  • Joined: 2017/01/12 18:50:05
  • Status: offline
The little 300 that could. 2017/01/12 19:19:36 (permalink)
Do you have a step by step photos for the 2wd frame to 4x4 swap? Been dying to do it to my 300.


Sent from my iPhone using Tapatalk
#87
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/12 19:33:03 (permalink)
I don't man, pretty sure I read a write up on the old hl forum about a guy that done it tho. IMO you would prob come out cheaper finding a 4x4 frame and swaping everything over to it.


Sent from my iPhone using Tapatalk
#88
forzainformer
Grass Hog
  • Total Posts : 3
  • Reward points: 0
  • Joined: 2017/01/12 18:50:05
  • Status: offline
The little 300 that could. 2017/01/12 20:11:51 (permalink)
Finding a CLEAN 4x4 frame is tough to come by for me, I've just never found one


Sent from my iPhone using Tapatalk
#89
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2017/01/12 20:37:31 (permalink)
Replacing a few rusted out spots may be easier than wacking a whole frame. And you would already have your hubs knuckles and all


Sent from my iPhone using Tapatalk
#90
Page: < 12345 > Showing page 3 of 5
Jump to:
© 2017 APG vNext Commercial Version 5.5