Helpful ReplyHot!The little 300 that could.

Page: < 12345 > Showing page 2 of 5
Author
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2016/12/02 20:14:47 (permalink)
looks good
 


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#31
Mudtrax
Mud Master
  • Total Posts : 604
  • Reward points: 0
  • Joined: 2003/02/01 12:00:00
  • Location: South Carolina
  • Status: offline
Re: The little 300 that could. 2016/12/03 21:09:50 (permalink)
You getting there.

16' Rzr 1000
09' Rzr 800
96' Honda 300 4x4
96' Honda 300 4x4
88' Honda 300 2x4
#32
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/03 21:32:11 (permalink)
BridelessRacing

looks good

Β 




Thank you


Sent from my iPhone using Tapatalk
#33
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/03 21:33:52 (permalink)
Mudtrax

You getting there.




Trying, had some motor set backs I had to address but should be back in action and working on the Fab tomorrow


Sent from my iPhone using Tapatalk
#34
Mudtrax
Mud Master
  • Total Posts : 604
  • Reward points: 0
  • Joined: 2003/02/01 12:00:00
  • Location: South Carolina
  • Status: offline
Re: The little 300 that could. 2016/12/04 11:37:28 (permalink)
Cool deal man , the finished product will be nice.

16' Rzr 1000
09' Rzr 800
96' Honda 300 4x4
96' Honda 300 4x4
88' Honda 300 2x4
#35
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
Re: The little 300 that could. 2016/12/07 22:02:19 (permalink)
well I've hit a wall.. thought the rear drive shaft set up i had was going to work. threw a set of 29.5 i had laying around on it and let it spin on the stand... needless to say I've got to back up and regroup. looks like I'm going to have to either drill and tap a bolt hole in the output shaft and run a flat plate welded to a collar that fits the splins, to have a bolt up style drive shaft, run a carrier bearing, or try and figure some other option out. going to call tomorrow and see about getting a cv type shaft made for it.. i knew the drive shafts were going to be a big kicker with this build, but this thing is starting to aggravate me now. thinking i may take a break and throw the 8" sra lift and 350d under the parts bike I've got and go ride the rest of the week. I've sure got to catch a second wind thats for sure, because Im tired of making drive shafts that don't work.. ready to pull my hair out..
 

Christopher lindsey on fb

2008 arctic cat 650h1:
Bored to 750 decked and renickeled
Port and polished
Valve springs
40mm carb
Hardened rockers
Straight cut bevel gears
4.0 diffs
Radiator relocate
Hid high beams
Powder coat everything
32" backs
Little blue bottle fully plumed and wired πŸ™ˆ

Honda 300 IRS :
317,big red cam and chain
54%
4.0 arctic cat diffs
custom transfercase (no longer turns backwards)
Metal air box
Dual exhaust
3" body lift
8" double arched a arms
Custom hand made everything!
#36
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/07 22:48:56 (permalink)
I know the feeling homie. Also I just realized the 350d rear end and the 800s shock you have I got for Whitney for you I think. I searched high and low for that rear end so paint it gold cause it was like finding gold hahaha.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#37
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
Re: The little 300 that could. 2016/12/08 12:18:09 (permalink)
lol its very unmolested thats for sure
 

Christopher lindsey on fb

2008 arctic cat 650h1:
Bored to 750 decked and renickeled
Port and polished
Valve springs
40mm carb
Hardened rockers
Straight cut bevel gears
4.0 diffs
Radiator relocate
Hid high beams
Powder coat everything
32" backs
Little blue bottle fully plumed and wired πŸ™ˆ

Honda 300 IRS :
317,big red cam and chain
54%
4.0 arctic cat diffs
custom transfercase (no longer turns backwards)
Metal air box
Dual exhaust
3" body lift
8" double arched a arms
Custom hand made everything!
#38
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/08 12:55:26 (permalink)
Yea it was off a bike that the guy forgot to check the oil in it and burnt it up years and years ago. was put in a barn and left there. I sold the plastics in no time cause they were like brand new with decals and all.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#39
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2016/12/08 19:53:46 (permalink)
i need carnage driveshaft pics so i can help
or video


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#40
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
Re: The little 300 that could. 2016/12/08 20:10:32 (permalink) ☄ Helpfulby Rebel Redneck 2016/12/12 00:29:43
i dont have any carnage videos because i didnt run it long but pretty much its trying to walk off the splines of the output shaft. ive got a video ill post of my spining the tires by hand which works perfect but when you make the motor be the input to the drive shaft it tries to bind up and walk off the spins. called turner today, im going to get the front frame cut and front diff mounted and then send them both shafts and get them to make me a set of cv shafts with roll pin in the output shaft.

Christopher lindsey on fb

2008 arctic cat 650h1:
Bored to 750 decked and renickeled
Port and polished
Valve springs
40mm carb
Hardened rockers
Straight cut bevel gears
4.0 diffs
Radiator relocate
Hid high beams
Powder coat everything
32" backs
Little blue bottle fully plumed and wired πŸ™ˆ

Honda 300 IRS :
317,big red cam and chain
54%
4.0 arctic cat diffs
custom transfercase (no longer turns backwards)
Metal air box
Dual exhaust
3" body lift
8" double arched a arms
Custom hand made everything!
#41
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/08 20:14:58 (permalink)
https://vimeo.com/194917197
The sounds you hear it the tire hitting the saw horse and the modified transfer case.


Sent from my iPhone using Tapatalk
#42
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2016/12/11 19:32:24 (permalink)
need to add a pillow block beaing


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#43
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/11 20:16:06 (permalink)
Well yes I agree. But how do you suppose I get it on there lmfao hahah? Even once I weld to pieces of splines together for the middle between the two u joints, the splines are bigger than shaft so how would I get a carrier bearing to work?


Sent from my iPhone using Tapatalk
#44
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/11 20:20:20 (permalink)
Nvm I got it!!! Thank you so much. I'll let yal know how it works out. (Get cold rolled steal bigger than the splines. Counter bore it for the spline shafts then weld them. Dang thanks a lot for helping spark that idea.. it's been driving me nuts


Sent from my iPhone using Tapatalk
#45
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: The little 300 that could. 2016/12/12 00:32:23 (permalink)
Very cool build

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#46
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/12 14:14:19 (permalink)
Well time to get her done now that you have all the math worked out!!!!! Hahaha

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#47
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/12 15:31:59 (permalink)
Rebel Redneck

Very cool build




Thank you


Sent from my iPhone using Tapatalk
#48
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/12 15:33:32 (permalink)
00_NUTT

Well time to get her done now that you have all the math worked out!!!!! Hahaha




Finishing up my beater, and still waitin on my ballpoint plates for the front



Sent from my iPhone using Tapatalk
#49
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/12 18:15:57 (permalink)
Excuses excuses!!!!!! Hahahaha

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#50
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2016/12/14 21:00:39 (permalink)
Cjlindsey11
Nvm I got it!!! Thank you so much. I'll let yal know how it works out. (Get cold rolled steal bigger than the splines. Counter bore it for the spline shafts then weld them. Dang thanks a lot for helping spark that idea.. it's been driving me nuts


Sent from my iPhone using Tapatalk

your welcome.


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#51
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/15 12:12:53 (permalink)

Got the seat cover in and going to pick up the front knuckles and hubs today 😍😍


Sent from my iPhone using Tapatalk
#52
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/15 14:48:34 (permalink)
That's gonna look pimp!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#53
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2016/12/15 18:57:35 (permalink)
<p>
Cjlindsey11<br />Nvm I got it!!! Thank you so much. I'll let yal know how it works out. (Get cold rolled steal bigger than the splines. Counter bore it for the spline shafts then weld them. Dang thanks a lot for helping spark that idea.. it's been driving me nuts <br /><br /><br />Sent from my iPhone using Tapatalk<br />
<br />your welcome.</p>


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#54
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/17 03:35:40 (permalink)
Ball joint plates should be here Monday and work shall continue. Got my seat cover in and I hate it so it's back to the drawing board. Thinking blue with green stitching.

In the mean time I did a little more work to my 450 beater project. Got the metal air box welded up. Gonna plum snorkel to the headlight pod tomorrow. And do a little riding. Maybe the timing chain won't come apart in the process lol built the thing out of spare parts, rode 50 miles of dirt rds the other night after I got it together and it was running a little lean and hot. Needless to say the timing chain and valves need a little work but it will do for a beater 😝



Sent from my iPhone using Tapatalk
#55
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2016/12/17 09:14:46 (permalink)
be sure and pump that axle tube full of grease.
dont put crankcase vent back in airbox without running it right under handlebars first.
if your not snorkleing the bike
be sure to block off the pullcord
adding the top rails off a junk 450 frame gives you a easy 2 inch body lift
 


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#56
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2016/12/17 09:31:20 (permalink)
my $25 and another seat offer still stands.


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#57
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: The little 300 that could. 2016/12/17 12:25:15 (permalink)
I with Mr. Don. I like that seat cover. Once you get your plastics done it should fit in nice.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#58
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: The little 300 that could. 2016/12/19 08:02:47 (permalink)


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#59
Cjlindsey11
Dirt Monster
  • Total Posts : 67
  • Reward points: 0
  • Joined: 2016/03/13 18:00:10
  • Status: offline
The little 300 that could. 2016/12/20 16:02:33 (permalink)
BridelessRacing

be sure and pump that axle tube full of grease.

dont put crankcase vent back in airbox without running it right under handlebars first.

if your not snorkleing the bike

be sure to block off the pullcord

adding the top rails off a junk 450 frame gives you a easy 2 inch body lift

Β 




Shoot me a pm on fb and we will work out something on the seat cover..

what's the deal with running crank vent to handle bars and back?
I sealed up the pullstart but had a small leak at bottom so pulling it off today and re sealing it.

I've got a spare good 450 frame but think I'm gonna keep it for a future build maybe.



Sent from my iPhone using Tapatalk
#60
Page: < 12345 > Showing page 2 of 5
Jump to:
Β© 2017 APG vNext Commercial Version 5.5