Helpful ReplyHot!Tell me about your shop/bench vise that you use.

Page: << < ..678910.. > >> Showing page 9 of 14
Author
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/01/03 08:38:10 (permalink)
Is this what you need?


 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/01/21 21:38:02 (permalink)
I won an old vise last night in a forum contest.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/01/31 06:49:50 (permalink)
Heres the vise i won in a forum contest. Vintage Grand #3 Quickcet

upload pics
post edited by bcom - 2017/01/31 06:52:55

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/01/31 12:42:23 (permalink)
That's a nice little vise!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/07 20:25:29 (permalink)
Just picked this up today. One of the largest,strongest and rarest vises ever made. The Reed 4C at 198LBS

image hosting without registration

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/07 20:46:13 (permalink)
Wow that vise is awesome!!!!! Did you get a hernia lifting it????

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/07 20:53:22 (permalink)
I had a friend help me lift it

how to take screenshots

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/07 21:48:21 (permalink)
Hahaha that's the best friend ever. You might need a chain hoist over your work bench to help restore it!!!! I can't wait to see it all redone. You gonna keep it or flip it?

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/08 06:28:35 (permalink)
I like looking at it right now. It makes me smile when i go into my garage. Its like a trophy. I may not restore this one. I might just clean the dirt and rust off it and let it show its original beauty. Ill put some kind of protectant over the iron to keep it from rusting but thats about it. Im sure if someone offered enough money,id let it go

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/08 06:50:48 (permalink)
I hear you brother. I'd have a hard time to get rid of it also, but if someone offered me enough money it would be gone. That's called the I don't want to sell it price.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/08 08:29:31 (permalink)
00_NUTT
I hear you brother. I'd have a hard time to get rid of it also, but if someone offered me enough money it would be gone. That's called the I don't want to sell it price.


Very very true

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
Jeepwm69
Mud Maniac
  • Total Posts : 309
  • Reward points: 0
  • Joined: 2015/01/09 15:15:24
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/09 11:32:50 (permalink)
Awesome
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/09 15:41:36 (permalink)
Whats really cool about the 4C Reed is that the jaws are forged into the vise itself. There are no jaws to replace just serrations in the forging and when you look at the pic,you can tell the vise was hardly ever used which is rare as heĺl on a vise as rare as this


 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/09 15:56:02 (permalink)
Dude that looks like new!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/09 16:50:26 (permalink)
Yeah no kidding. That was the only problem with some Reeds that had the jaws forged into the vise itself. Once they wore out,you couldnt replace them. However youre talking 40-50 years to wear them out too. Some Reed jaws are replaceable and some are not.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/09 21:20:27 (permalink)
Yea I seen that. I'm sure a machine shop would charge a nice pennie to redo the serrations.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/09 23:36:22 (permalink)
I already asked my machine shop ànd tbey said they wouldnt touch it. However Kevin Scott in Colorado could mill the jaws and drill and tap them to add a set of removeable jaws.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/02/10 06:47:09 (permalink)
He's the man when it comes to vises!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/06 11:32:53 (permalink)
Just picked these two up yesterday. Brand new old stock 2014. One Wilton C0 and one Wilton C1 vise. $1600 worth of vises!!!! I got for a couple hundred bucks!!💩


 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/06 14:07:53 (permalink)
Holy cow!!! How did that happen? Going out of business or what?

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/06 15:04:50 (permalink)
Yep a place was going out of business and these were special ordered from Grainger for a customer and customer never showed up to buy.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/06 15:18:32 (permalink)
Wow what a deal!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2551
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/06 19:29:03 (permalink)
Man you have got the hook up!!

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/06 19:53:15 (permalink)
Yea I beginning to not like BCOM anymore!!!! If that's one thing he has is the luck of the vise!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/06 21:04:26 (permalink)
I just got a text from a friend saying he was just notified that one of his friends dads was a hoarder of old vises and he just died. There are over 20 new bullets in his basement with countless older unidentified vises on shelves and his children are trying to clean things out. Im trying to get a walk through of the place but i guess these are old hermit people, so me getting a glance of whats available is gonna be impossible but hopefully the dead guys children finally come to terms to let others finally enjoy what their father created in his basement--- A wondrous world of old vises that have never seen the light of day. Even if i do not get a chance to see whats in there, i hope the guys children do not scrap or sell the house with all the old vises included. :( :(

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/06 21:18:17 (permalink)
Wow I bet it's like a time machine down there. I'd be passing and seeing if a dumpster appears!!! Then I'd be a dumpster diving fool!!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2551
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/07 10:57:01 (permalink)
Get you a back brace and a ski mask and go get em!!

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/26 21:51:06 (permalink)
Just picked up this rare breed today


 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2353
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/26 21:54:02 (permalink)
That is sexay!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2015
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/03/28 20:28:43 (permalink)
Just picked this up. An undated pat pending no4 bullet. One of the first ever built. Feast your eyes on tbis old buzzard!

screen shot

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
Page: << < ..678910.. > >> Showing page 9 of 14
Jump to:
© 2017 APG vNext Commercial Version 5.5