Hot!Tell me about your shop/bench vise that you use.

Page: << < ..111213 > Showing page 12 of 13
Author
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/27 20:50:31 (permalink)
No, he welded the ends on and sanded it.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/27 21:09:11 (permalink)
Freaking nice!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/27 21:13:40 (permalink)
It was his first try in making one. I thought he did well too.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/27 21:55:59 (permalink)
Yea he got that one right for sure!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/27 22:36:44 (permalink)
Some of you other guys need to post pics of your vises or go out and start buying some extra vises. I dont wanna be the only one posting pics :(

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/27 23:00:46 (permalink)
I found that one Wilton and have never seen another or any other brands. Not a big machinist area down here like what you had up there. Wish we did though cause id love to be on your level.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/27 23:42:10 (permalink)
Well i find myself just buying vises now and sticking them on a shelf and not doing anything with them but stare and smile at them. I must be weird🤓

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/28 06:55:50 (permalink)
That's how I look at the junk in my yard!!!! Then the wife comes out!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2542
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/28 07:54:24 (permalink)
Here's our big Colombian at our shop with a fresh set of jaws!





Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/28 07:58:22 (permalink)
Nice!!! Look that freaking bolt bin!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2542
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/28 08:17:03 (permalink)
Yeah it's nice, now if only we could teach grown men to put stuff back in the right bin!!

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/28 08:29:34 (permalink)
Maybe they can't read!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/29 00:37:10 (permalink)
Oh wow! Is that a 205 or 206 perhaps? Whats the jaw width?

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/29 06:57:46 (permalink)
Go get it BCOM!!!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/29 19:55:09 (permalink)
Too far for me!

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/29 21:15:26 (permalink)
That's nothing for a ninja with skills like yours!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/06 06:15:28 (permalink)
Just picked this up yesterday. A very rare Milhoff vise. This is only the 2nd one know to be found. Only one person has come forward showing one and theres only a few pics on the net. The vise is fully welded steel. Not cast iron. Made in Minnesota. Very cool!







post edited by bcom - 2017/07/06 06:19:55

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/06 06:49:07 (permalink)
Ok give me the story of how you found it??? That's a neat looking vise!!! That's a nice little collection you got going there!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/06 11:10:54 (permalink)
I was just browsing the marketplace on bookface and the vise popped up. I quickly contacted the owner so i could pick it up

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/06 12:04:07 (permalink)
Dude that's a score!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/08 17:42:09 (permalink)
Somehow this followed me home today. A beautiful Reed 2C. Weighs around 90lbs. The main jaws and pipe jaws look like theyve never been used.


 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/08 18:00:50 (permalink)
I'm really really hating you!!! So how did it follow u home?

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/08 18:37:37 (permalink)
Well it didnt really follow me. I kidnapped it! The Reed C series vises dont come up very often especially in this condition. Alot of people say the Reed vises are tougher than Wiltons and i would have to agree with that.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/08 18:45:17 (permalink)
Is that redone or original condition?

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/08 20:30:42 (permalink)
Its been completely redone.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/08 21:01:21 (permalink)
Nice

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
fishfiles
Grass Hog
  • Total Posts : 9
  • Reward points: 0
  • Joined: 2017/03/10 04:44:30
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/16 05:38:40 (permalink)
on back my work truck I have a Wilton bullet , I think they are the best vices you can get , very expensive , over the years I have broke quite a few cheap vices -----I left the jaws open and drove with it one day and one jaw fell out as the set screw holding it in must have come lose , found a guy that duplicates the jaws and sells them , he broke a set and sold me one , I do have his contact info if anyone needs a jaw 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/16 13:24:41 (permalink)
I know everyone in the vise business. Where to get oem parts and where to get one off parts made. Pics of your bullet or it didnt happen!

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/16 13:25:48 (permalink)
By 4pm today, im headed over to pick up a monster vise! Ill post it when i get home!

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/07/16 14:00:48 (permalink)
BCOM has turned in to the vise king!!! He's part bloodhound and can sniff a vise out on the other side of the world!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Page: << < ..111213 > Showing page 12 of 13
Jump to:
© 2017 APG vNext Commercial Version 5.5