Hot!Tell me about your shop/bench vise that you use.

Page: << < ..111213 > Showing page 11 of 13
Author
doveman1
Super Swamper
  • Total Posts : 2541
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/02 21:28:42 (permalink)
Nice boot

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/03 11:41:37 (permalink)
Nice boot? They are cheap Wolverines and nearly 8yo.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/03 11:53:08 (permalink)
Man talking about wolverine's. Mine are about the same age and I noticed yesterday the soles are splitting!!!!! I'm sad now 😖

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2541
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/03 12:24:17 (permalink)
8 years?? I'm lucky to get 2 out of a pair!

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/03 12:29:42 (permalink)
You probably got some knockoffs!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2541
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/03 12:52:04 (permalink)
Wharewolf


I usually buy Ariat, but I wear my boots everywhere and they get put through h*** on a daily basis

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/03 14:15:44 (permalink)
Never owned a pair of Ariat. Usually I wear red wings.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/03 19:35:17 (permalink)
I hate wearing boots. I guess the reason they survived this long is because of me selling my bike and me injuring my back. I havent worn them in years but i keep them on stand by in my jeep.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/03 19:41:47 (permalink)
Never know when u need them!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2541
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/03 22:55:13 (permalink)
I need mine 24/7!

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/04 00:57:10 (permalink)
Dang the sh it must be deep!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/04 09:54:48 (permalink)
00_NUTT
Dang the sh it must be deep!!!!

Bless you

...........yep its pretty deep

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/05 07:17:25 (permalink)
Hahahahaha

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/16 03:59:27 (permalink)
Just picked up this large columbian. Im gonna use thise one as my daily driver vise since my other one has worn out jaws. I like the monster pipe jaws on this columbian and it has good jaws. Not worth a whole lot and its in good shape so i thought it would be a good vise to beat on. My macinest is buiding anther spindle handle for it since the original is bent a little bit.


 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/16 04:03:08 (permalink)
Dude are you now hunting vises under the cover of darkness? Planning on full restoration or just a little maintenance since its for work?

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/16 16:51:41 (permalink)
00_NUTT
Dude are you now hunting vises under the cover of darkness? Planning on full restoration or just a little maintenance since its for work?


Thats a good question and to tell you the truth im not sure yet. I did just pick up a cheap Campbell Hausfield air powered die grinder and i want to put a wire wheel on it to see if itll make clean ups faster and easier on my vises. Trying to find a cheap high rpm wire wheel but im not anyone around here has them for cheap.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/16 20:49:31 (permalink)
Yea certain tools just ain't cheap.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Jeepwm69
Mud Maniac
  • Total Posts : 300
  • Reward points: 0
  • Joined: 2015/01/09 15:15:24
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/19 09:57:50 (permalink)
bcom
00_NUTT
Dude are you now hunting vises under the cover of darkness? Planning on full restoration or just a little maintenance since its for work?


Thats a good question and to tell you the truth im not sure yet. I did just pick up a cheap Campbell Hausfield air powered die grinder and i want to put a wire wheel on it to see if itll make clean ups faster and easier on my vises. Trying to find a cheap high rpm wire wheel but im not anyone around here has them for cheap.

Wear eye protection.  **** spinning wire wheels love to throw tiny arrows into your face.
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/19 13:38:20 (permalink)
I always do. Im gonna get a shop apron as well so my clothes dont pick up stray wires

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/19 18:36:14 (permalink)
I just go commando!!!! Nothing like walking I'm the house looking like pin head!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Jeepwm69
Mud Maniac
  • Total Posts : 300
  • Reward points: 0
  • Joined: 2015/01/09 15:15:24
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/20 09:29:23 (permalink)
I think I need some new welding flip flops.  Burned the crap out of my feet this morning trying to get swingarm bearing races out with my wire welder...
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/20 22:36:16 (permalink)
I love when welding slag somehow jumps its way inside my clothes and you do a little dance shaking your clothes around hoping the slag will come out but sometimes you have to sit there and feel the burn

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/20 23:10:44 (permalink)
Like tucking your pants in your boots and some slag gets in there. You'll dance like it's 1999!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2541
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/21 05:52:19 (permalink)
I seen a welder who wore dress boots basically which are thinner than work boots. He was running a torch and the slag went through the leather and cooled off on top of his foot.

He wasn't very bright, glad he got ran off

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/21 06:46:52 (permalink)
Sometimes you wonder Doveman. We had a guy on the farm that was cutting a bearing off the end of a grain elevator on top of a rice dryer. Slag fell in his boot and he started stomping. Lost his footing and down he went. Didn't stop till he hit the ground. Of course nothing was wrong with him afterwards!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2541
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/21 12:08:48 (permalink)
What's fun is wearing an old shirt while welding then all of a sudden wondering why it's getting so hot under that hood then realizing you're on fire. Done that a few times!

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/27 14:05:47 (permalink)
Just picked up another Columbian 204 1/2M3. It is identical to the one i picked up weeks earlier. So now i have 2 of them.Check out the new handle on the red Columbian i had my machinest friend make. He made it out of a lawnmower axle! Very good work on the handle!






This is a lame Chinese rotating Wonder Vise. I didnt want this cheap thing. It was about 20 years old and it still had the packing paper on it. The old man said he would take $10 for it so i went ahead and bought it too. Ended up selling this țurd in less than 24hrs and quadrupled my profit on it. Hahaha! Goodbye lame Chinese Wonder Vise! It even had filler putty on it from the factory. Lameness!


 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/27 14:12:14 (permalink)
Go ahead BCOM. The handle looks awesome. Did you change the handle or you guy did?

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Super Swamper
  • Total Posts : 2005
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/27 15:24:11 (permalink)
My friend made it for me and put it in.

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2316
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Tell me about your shop/bench vise that you use. 2017/06/27 15:35:49 (permalink)
So he pressed the ends on?

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Page: << < ..111213 > Showing page 11 of 13
Jump to:
© 2017 APG vNext Commercial Version 5.5