Hot!Rancher 350 project

Page: 12345.. > >> Showing page 1 of 8
Author
4x4 big COON
Mud Bogger
  • Total Posts : 229
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: offline
2017/03/26 02:05:10 (permalink)

Rancher 350 project

Hey guys it's been a long time since I've been on here and I've had a lot of bikes come and go but I recently got a new bike and I've been getting to work on it. It's a red 2004 rancher 350 4x4 es. My uncle that I work for bought a 2016 rancher 420 so he gave me the 350 for free. Fixed the carb and replaced the starter and she runs like a champ. So here is what I have done to her so far. To start with I put a led lightbar on the front rack. I snorkeled it. Ran all new vent lines. Dialetric greased all electrical connections. New cv axles. Bought a 3/4"X11"X11" oil cooler and 10" electric fan and built a relocation kit and mounted it on the rack. 2" spacers in the rear. Built a 2.5" lift kit. Rear brake drum delete. I have a K&N air filter, Hmf performance pipe, Dyno jet kit, and Epi comp stall clutch kit on the way for it. And I have 30x9-14 silverbacks on chrome msa wheels. No motor work yet so struggles with the backs in thick stuff spins em good in water I just have to ride in first gear in bad mud. I plan on getting a 39% GR for it and stepping up to 32s. I plan on getting new plastics for it but other than that not sure what else I wanna do too it. Any suggestions are welcome. I want to build an axle paddle really bad but I need some more info on that. Like is it possible to put one on a 350 rear end? I know you can on a 350 D. Any input on this would be greatly appreciated
post edited by 4x4hondas - 2017/03/26 17:05:42

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
#1

234 Replies Related Threads

    00_NUTT
    Super Swamper
    • Total Posts : 2336
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Rancher 350 project 2017/03/26 21:33:26 (permalink)
    Sounds like you got everything covered. GR is the best upgrade you can do. Center axle paddle is possible but you will need to cut your axle tub and basically redesign your swing arm to where the axle and axle tube are removable like the 350D or 300. You could always do axle paddles at the hub's.

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
     
    #2
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/26 21:39:03 (permalink)
    Thanks I just don't have the money for the gr right now but I will be doing that as soon as I can. And I'm wanting to do a center axle paddle. I'm good at fabricating things in my shop but I need a lot more info and details before I'm ready to tackle the axle paddle bc I want to make sure it's done right

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #3
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/26 21:40:10 (permalink)
    I will try to get some pics posted in a few

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #4
    00_NUTT
    Super Swamper
    • Total Posts : 2336
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Rancher 350 project 2017/03/26 21:41:32 (permalink)
    Man just measure measure measure. Make sure all is square and welded good and roll with it.

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
     
    #5
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/26 21:57:31 (permalink)
    00_NUTT
    Man just measure measure measure. Make sure all is square and welded good and roll with it.
    will do man appreciate it. when I tackle it I'll be sure to get pics through the process

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #6
    00_NUTT
    Super Swamper
    • Total Posts : 2336
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Rancher 350 project 2017/03/26 22:01:48 (permalink)
    Yea post those pics brother. We like eye candy!!

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
     
    #7
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/26 23:06:20 (permalink)
    Man I'm trying to post pics off my iPhone and it says the image is too large

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #8
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 11:45:34 (permalink)
    Can anybody help me upload pics

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #9
    00_NUTT
    Super Swamper
    • Total Posts : 2336
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Rancher 350 project 2017/03/27 17:51:19 (permalink)
    Use imgur. Upload pics to there. Then copy the bbcode link. It will start and end in IMG. Paste that link in to your post and the picture will come up.

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
     
    #10
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 18:25:07 (permalink)
    00_NUTT
    Use imgur. Upload pics to there. Then copy the bbcode link. It will start and end in IMG. Paste that link in to your post and the picture will come up.
    ok I just downloaded imgur. Can you explain this a little better please I'm not good with this kind of stuff

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #11
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 18:27:28 (permalink)
    https://i.imgur.com/mXX6LsS.jpg

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #12
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 18:30:36 (permalink)
    https://i.imgur.com/mXX6LsS.jpg

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #13
    00_NUTT
    Super Swamper
    • Total Posts : 2336
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Rancher 350 project 2017/03/27 19:21:37 (permalink)
    No not the web link. Look on the side next to your pick. You will see where there is a drop down to select the format you want the image in.

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
     
    #14
    00_NUTT
    Super Swamper
    • Total Posts : 2336
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Rancher 350 project 2017/03/27 19:26:40 (permalink)
    post edited by 00_NUTT - 2017/03/27 19:27:41

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
     
    #15
    00_NUTT
    Super Swamper
    • Total Posts : 2336
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Rancher 350 project 2017/03/27 19:28:29 (permalink)

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
     
    #16
    00_NUTT
    Super Swamper
    • Total Posts : 2336
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Rancher 350 project 2017/03/27 19:29:37 (permalink)
    Side shots please!!!!!!

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
     
    #17
    doveman1
    Super Swamper
    • Total Posts : 2547
    • Reward points: 0
    • Joined: 2008/06/11 09:51:16
    • Location: Marshall Texas
    • Status: offline
    Re: Rancher 350 project 2017/03/27 19:36:11 (permalink)
    Those backs have got some miles on them!!

    Green 2015 Grizzly 700
    14in Sti Hd wheels, 29.5 OL2's 


     If you're gonna be dumb you gotta be tough.
    #18
    00_NUTT
    Super Swamper
    • Total Posts : 2336
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Rancher 350 project 2017/03/27 19:47:51 (permalink)
    Probably still getting the job done with a little less strain!!!

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
     
    #19
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 21:03:23 (permalink)
    They do have a bunch of miles but heck yea they still eat hard lol. And hey I'm sorry but I still can't figure it out if I post a bunch like I did could you please fix them like you did those or would it be too much trouble

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #20
    00_NUTT
    Super Swamper
    • Total Posts : 2336
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Rancher 350 project 2017/03/27 21:08:13 (permalink)
    Put them up and I'll fix them.

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
     
    #21
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 21:20:34 (permalink)
    Is it bc I'm posting them private instead of public that it's not giving me that option or something

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #22
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 21:21:51 (permalink)
    Ok thanks man

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #23
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 21:25:52 (permalink)
    https://i.imgur.com/jh50r0L.jpg

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #24
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 21:27:02 (permalink)
    https://i.imgur.com/2rQ2wHu.jpg

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #25
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 21:28:02 (permalink)
    https://i.imgur.com/QnZEo5k.jpg

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #26
    00_NUTT
    Super Swamper
    • Total Posts : 2336
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Rancher 350 project 2017/03/27 21:29:14 (permalink)


    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
     
    #27
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 21:35:09 (permalink)
    https://i.imgur.com/YPifr5C.jpg

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #28
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 21:36:36 (permalink)
    https://i.imgur.com/F6AUzl2.jpg

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #29
    4x4 big COON
    Mud Bogger
    • Total Posts : 229
    • Reward points: 0
    • Joined: 2015/04/18 23:50:12
    • Location: Franklinton Louisiana
    • Status: offline
    Re: Rancher 350 project 2017/03/27 21:44:11 (permalink)
    Hey guys what kind of options do I have for motor work if I decided to go there. Without spending a rediculous amount of money

    2004 red Honda rancher 350 4x4 es
    30x9-14 gorilla silverbacks on chrome msa ss wheels
    Snorkeled
    Waterproofed
    3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
    24" led lightbar-$30
    Rear brake drum delete
    3" custom lift kit
    2" wheel spacers for back
    Sixity cv axles
    Epi competition stall clutch kit
    Dynojet kit
    K&N air filter
    New carburetor
    Hmf performance pipe



    2012 rancher 420 es
    25" maxxis tires on 12" wheels
    Strong made Front and rear baskets
    #30
    Page: 12345.. > >> Showing page 1 of 8
    Jump to:
    © 2017 APG vNext Commercial Version 5.5