Hot!Rancher 350 project

Page: << < ..678910.. > >> Showing page 8 of 12
Author
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2017/05/03 16:44:13 (permalink)
Ok I fixed it the spot where the throttle cable goes in the carb that compartment was caked up with mud and it was Holding the throttle up Cleaned it out and it's all good so I need to seal it off where mud won't get in there

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
00_NUTT
Super Swamper
  • Total Posts : 2594
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Rancher 350 project 2017/05/03 21:39:30 (permalink)
A little silicone and done!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2017/05/07 23:33:49 (permalink)
Yeet

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2017/05/09 14:05:28 (permalink)
So I got a new project. I'm a Honda guy but my buddy just gave me a Yamaha wolverine 350 4x4 to fix his Yamaha big bear 350. All I have to do is put his new carb on. The wolverine only has a broke foot shift cable and has been sitting up. Does it have potential to be a good second mud bike

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
Jeepwm69
Mud Maniac
  • Total Posts : 329
  • Reward points: 0
  • Joined: 2015/01/09 15:15:24
  • Status: offline
Re: Rancher 350 project 2017/05/09 16:08:37 (permalink)
We don't have a lot of Yamahas around here, but from what I've seen on them on the interweb forums like this one, Yamaha is right there with Honda on build quality, and the older Yamahas are supposed to be about as good as the older Hondas.
 
Sounds like the price was right.  Fix it, and if you don't like it, sell it.
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2017/05/09 23:45:02 (permalink)
Yea that's what I figured might give it to my dad since I wrecked his 420 doing 63 lol

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
doveman1
Super Swamper
  • Total Posts : 2620
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Rancher 350 project 2017/05/13 22:30:55 (permalink)
Thought about a nitrous kit?

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 
2in HL lift
N2deep battery relocation
Wild boar radiator relocation
Atv trail tunes Kicker twin tubes
JBS extreme sheave with purple secondary spring


 If you're gonna be dumb you gotta be tough.
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2017/05/13 22:33:20 (permalink)
Do fwat?!!!?!?!?!?!?!!!?????!!?????!??!?!??!!

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
doveman1
Super Swamper
  • Total Posts : 2620
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Rancher 350 project 2017/05/13 22:35:06 (permalink)
You know, for them deep water holes!

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 
2in HL lift
N2deep battery relocation
Wild boar radiator relocation
Atv trail tunes Kicker twin tubes
JBS extreme sheave with purple secondary spring


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2594
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Rancher 350 project 2017/05/13 23:01:43 (permalink)
Yup 150 shot!!!! Shouldn't hurt anything.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2017/05/27 22:57:37 (permalink)
Update 350 still running strong and no smoke until she gets really hot so it's just in the hmf from before But anyways now something in my front end is making a terrible racket and it's way harder to steer. Gotta look into it. Btw the axle paddles work great

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
00_NUTT
Super Swamper
  • Total Posts : 2594
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Rancher 350 project 2017/05/28 09:16:46 (permalink)
Us it fighting you to turn? Like it wants to turn back on its own? If so it's one of your CV shafts.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2017/05/30 13:00:28 (permalink)
Yea that's what I'm thinking it is

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
00_NUTT
Super Swamper
  • Total Posts : 2594
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Rancher 350 project 2017/05/30 16:23:58 (permalink)
Probably is.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2620
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Rancher 350 project 2017/05/30 17:01:56 (permalink)
Remember, on a Honda when you go to work on the front end , more than likely the wheel bearings will be bad.

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 
2in HL lift
N2deep battery relocation
Wild boar radiator relocation
Atv trail tunes Kicker twin tubes
JBS extreme sheave with purple secondary spring


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2594
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Rancher 350 project 2017/05/30 18:25:52 (permalink)
Yea change it all while your there.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2017/06/02 09:50:09 (permalink)
Yea it needs bearings I wrecked my truck so I had to put the bike on hold until my truck is fixed

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
doveman1
Super Swamper
  • Total Posts : 2620
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Rancher 350 project 2017/06/02 10:56:14 (permalink)
No excuses!

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 
2in HL lift
N2deep battery relocation
Wild boar radiator relocation
Atv trail tunes Kicker twin tubes
JBS extreme sheave with purple secondary spring


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2594
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Rancher 350 project 2017/06/02 12:37:32 (permalink)
Yup he needs to get his priorities straight!!! Atv first truck second!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2017/06/02 18:32:37 (permalink)
Lmao guys I don't even have a ride to work. The white ford must be fixed

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
doveman1
Super Swamper
  • Total Posts : 2620
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Rancher 350 project 2017/06/02 21:27:41 (permalink)
Spend $60 and put wheel bearing on and there you go, a ride to work!

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 
2in HL lift
N2deep battery relocation
Wild boar radiator relocation
Atv trail tunes Kicker twin tubes
JBS extreme sheave with purple secondary spring


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2594
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Rancher 350 project 2017/06/02 22:11:07 (permalink)
Cheaper to fix bike than truck!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2620
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Rancher 350 project 2017/06/03 05:33:20 (permalink)
That's just being logical

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 
2in HL lift
N2deep battery relocation
Wild boar radiator relocation
Atv trail tunes Kicker twin tubes
JBS extreme sheave with purple secondary spring


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2594
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Rancher 350 project 2017/06/03 09:26:35 (permalink)
Plus bike is cheaper on gas and you can take short cuts to work!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2017/06/04 09:27:28 (permalink)
Lmao y'all kill me well see

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2018/05/23 01:43:55 (permalink)
Hey fellas I know it’s been a while but the Honda addiction has hit me again (it never really left me I’ve just been busy) but anyways I’m wanting to go ahead and finally build my big lift for the 350 and grab that 39% GR I never got. I’ve got some brand new 30” monster mayhem’s but want something bigger. I want to build a 6” or 8” and stretch. There is a yellow 350 rancher es in mud in my blood forum and was for sale on Craigslist the lift was yellow and it had axle paddles and snorkeled exhaust. I would love to replicate that lift. I need some help though. Hopefully 00nut or Louisiana outlaw will chime in. I’m wanting to know what size materials I will need and how much of what I’ll need. And close ups of custom lifts would be nice. Also need to know how much stretch is required for 6 and 8” lifts. Plz help guys

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2018/05/23 01:48:57 (permalink)
As soon as I know what all I need to pick up I’m headed to capital steel to grab it all and get started. Tonight I tore down my rear Bc wheel bearing decided to dissolve and broke hub studs stripped nuts and broke spacer got all new parts coming and grabbed a new seat also getting ready to order new outer (black) plastics and gonna have the faded inner plastics professionaly painted by a friend of mine. James Clark always responds to me about the gr but don oglesby never has in 2 years sadly.

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2018/05/23 14:58:08 (permalink)
Also acquired an old style foreman 500 auto on trade for working on my girls bros can am Needs a good bit of work though. But seriously guys someone chime in it’s dead on here

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
00_NUTT
Super Swamper
  • Total Posts : 2594
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Rancher 350 project 2018/05/23 19:33:35 (permalink)
The materials needed are 3/4 id pipe for a-arms. The pipe for the stretch is 3" I'd for the driveshaft side. You can fab however you want the other side. An 8" stretch can do a 6" or 8" lift on the rear. You need 1 1/8" solid round bar to stretch the driveshaft. You will need to cut the driveshaft in half. Drill down center of the round bar big enough to press driveshaft cut ends down in it(you want it as tight fit as possible) Make sure you have a couple of cross holes to weld the round bar and shaft together and also weld around where the joint and the collar meet the round bar. It's best to Tig weld it and heat then heat treat it in lime to make a strong shaft that's not brittle. Also if you look online you can probably find some ball joint plates for the front which helps make it a lot easier and looks wat better than hacking up the front a-arms. Run CV shafts at about a 38 degree angle on the bar. You will need plus 6 or 8" CV shafts depending on the lift height. Gorilla, Turner or Cobra makes them. You will need to build a jig of some form to keep some wheels square so you can mount the CV shafts to the hub and hub to the wheel. Once you get you lift height right along with CV angle then make sure everything is square to the frame and start sending and welding pipe. Double arch the a-arms. It will help give you a little more clearance for the shaft to pass through. Also pay attention to the making of the tie rods. As this is key to having good or bad steering. Also I stress do not cut and stretch your CV shafts!!! It never last!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
4x4 big COON
Mud Maniac
  • Total Posts : 314
  • Reward points: 0
  • Joined: 2015/04/18 23:50:12
  • Location: Franklinton Louisiana
  • Status: online
Re: Rancher 350 project 2018/05/24 12:58:53 (permalink)
Ok so I picked up a couple sticks of 3/4” Id and had them cut in half to fit in my truck so I’ve got 42ft of it to play with. I have the solid round bar to use and gotta get pipe for the stretch. O yea can I just sleeve my stock axles to build the lift and then go buy some turners Bc I don’t have the cash for axles rn lol.

2004 red Honda rancher 350 4x4 es
30x9-14 gorilla silverbacks on chrome msa ss wheels
Snorkeled
Waterproofed
3/4"X11"X11 5/8" oil cooler and 10" electric fan relocated on rack
24" led lightbar-$30
Rear brake drum delete
3" custom lift kit
2" wheel spacers for back
Sixity cv axles
Epi competition stall clutch kit
Dynojet kit
K&N air filter
New carburetor
Hmf performance pipe



2012 rancher 420 es
25" maxxis tires on 12" wheels
Strong made Front and rear baskets
Page: << < ..678910.. > >> Showing page 8 of 12
Jump to:
© 2018 APG vNext Commercial Version 5.5