AnsweredHot!New Guy From West TN Honda 300

Page: << < ..678910.. > >> Showing page 6 of 12
Author
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2016/12/24 23:02:19 (permalink)


https://vimeo.com/196993431









Got the diff out from under the red bike with the brake delete and stuck it under the black bike. Rebuilt a brake panel I had laying around and put on the black bikes diff then stuck it under the red bike.
The black bikes diff was full of water so I flushed it out, the brake side bearing was gone but the diff bearings are OK for now. Also changed the oil in the front diff and transfer case which was milky as I expected. Fixed a few loose things. Ball joint nuts, front axle nuts which I had to space out to get to work correctly. Now I just have to fix a few wiring issues, build a snorkel, new tires and wheels, and stuff.

Anyone have experience painting plastics with Plasti dip?
Thanks everyone
I put a pair of rear 300 shocks in the front of the black bike and used a pair of 400 ex shocks on the back. Got about 2 inches of lift all the way around. Used a regular shock on the back of the red bike but I will end up changing it at some point because it's blowed out and sagging

Sent from my XT1585 using Tapatalk

Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: New Guy From West TN Honda 300 2016/12/24 23:12:22 (permalink)
my entire blue bike is plasti diped it use to be green plastics and tank

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2016/12/24 23:13:22 (permalink)
What all did you do? Prep ECT?

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: New Guy From West TN Honda 300 2016/12/24 23:27:38 (permalink)
i washed all dirt off of everything and cleaned very thoroughly and removed the black mud guards. Then i wiped everything down with rubbing alcohol 2 times and used plenty of the alcohol then after it all dried i just coated everything 1 liight coat at a time and allowed 15-20 minutes between coats and i did it 4 times. Then i put this glossifier stuff on it and did it another 5 coats same process just no cleaning. Then once it was all done and i waited 2 days i sprayed it all down with simple green and washed it good with a power washer on the lowest pressure setting and it removed the sticky texture and made it super shiny. Thats why it doesnt look any different than oem blue fenders. Also you cant get any oil gas or anythign like that on it or it will peel up and you cant use tire shine stuff. the onlythign you can use to clean it with is simple green or purple power.

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2016/12/24 23:30:29 (permalink)
Ok.
Thanks. I don't really want to just rattle can them with regular paint but it's going to be a basher bike so.
Idk yet.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: New Guy From West TN Honda 300 2016/12/24 23:32:51 (permalink)
dont rattle can it plastidip doesnt come off as easily it does peel but nothing like paint when it doesnt peel its from something like my boot rubbing against it alot or someone shoe and it just peels a little then stops not the whole thing

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2017/01/04 16:31:31 (permalink)
Last night I worked on the basher bike. I put a new snorkel on it. Used spa pipe and came up through the dash. It will work for now until I decide exactly how I want to run it in hard line..
Also new fuel filter and line.

Sent from my XT1585 using Tapatalk

00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: New Guy From West TN Honda 300 2017/01/05 21:00:35 (permalink)
We needs some pics!!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2017/01/05 21:28:30 (permalink)


Here is a teaser pic.
I scraped the getto rigged junk that the PO has put on it. I will try to get more pics Tomorrow

Sent from my XT1585 using Tapatalk

Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2017/01/05 21:29:41 (permalink)


Sent from my XT1585 using Tapatalk

00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: New Guy From West TN Honda 300 2017/01/05 22:11:20 (permalink)
Man that's the very first tubing I used in 97. Worked well and did the job. Don't for get to snorkel carb vents and crank case lines. I just ran those up with the snorkel and folded the lines over and zip tied them to the tubing. I had actually bent some flat iron and mounted it on the left of the front rack and ran the tubing up the left side with it. A pvc elbow fits perfect over the end of the spa tubing also.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2017/01/08 09:43:15 (permalink)

New starter solenoid for the basher bike. The solenoid is bad but the starter is fine so I will be installing this today probably. I ordered it off Amazon for 6 bucks brand new. We shall see how well it holds up. If I get a year out of it I will be tickled

Sent from my XT1585 using Tapatalk

00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: New Guy From West TN Honda 300 2017/01/08 10:12:14 (permalink)
China proud!!!!!! Hahahahahahahahahahahahahahahahahahahaha

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/01/08 10:18:37 (permalink)
Yeah I know I know. It's kinda cheaply made but it basically works. I did have to put my plug on it. I think they sent me the wrong one or something. No big deal. It works like it's supposed to I just have some wiring to fix. All the plugs and stuff are rotted and breaking

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2017/01/08 10:28:23 (permalink)


Sent from my XT1585 using Tapatalk

Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
2017/01/08 10:30:39 (permalink)
Currently how snorkel is done. Still have to re do the crank case vent line. It's to cold for deep water right now anyway so no real hurry.
Fixed a couple wiring bugs so now my electric start is working great with the new solenoid. Now I just have to pull the racks off send them out for powder coat, build floorboards, trim and paint plastics and get new wheels and tires.

Sent from my XT1585 using Tapatalk

Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
2017/01/08 10:31:55 (permalink)
And maybe a disk front brake set up and a I definitely want a handle bar riser. I will build that. No biggie and need to mount light bar somewhere. Stock lights are painted over and I guess don't work

Sent from my XT1585 using Tapatalk

00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: 2017/01/08 12:16:03 (permalink)
Good progress homie. Yea paint and lights don't go together to often. Get you some flange mount 3 over 3 LEDs an the will fit the hole perfect and give u plenty of light.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/01/08 13:49:00 (permalink)
Thanks buddy.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2017/01/08 20:33:56 (permalink)

I am thinking about using these tires. I have a full set and all I need is some different rims or some adapters. The rims are the small 5 lug pattern

Sent from my XT1585 using Tapatalk

BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/01/08 22:02:27 (permalink)
what rim size are they?


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/01/08 22:06:40 (permalink)
15 inch

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: New Guy From West TN Honda 300 2017/01/09 07:22:13 (permalink)
4x105x15 car rims would work
 

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/01/09 10:45:01 (permalink)
That's what I was figuring on.
I may build some adapters though. I have a set of old grip spurs on the same kind of rims I may want to try too so I might build adapters

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: New Guy From West TN Honda 300 2017/01/09 21:31:51 (permalink)
What did those tires and wheels come off?

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/01/09 21:33:47 (permalink)
They came off my COOT which is a UTV that was built back in the 60s and 70s for a while. But they are a military style tire and that size was normally on jeeps in the military.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2180
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: online
Re: New Guy From West TN Honda 300 2017/01/10 22:32:56 (permalink)
Yea I know what that is and I thought the tire tread looked familiar.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/01/10 22:49:56 (permalink)
Do you have a coot?
I got 2 lol. One is in good shape I just have some drive line parts to fixe I blew up a gear or key in the transmission and busted a gear in the front gear box I think. That 20hp Honda engine I shoved down In there really is strong plus I changed the output sprocket on the trans and dropped the gearing for even more torque. I used to use at the mini Tractor and hot rod lawnmower pulls all the time. I pulled the sled set at 7klbs 427ft one night. Only reason I stopped was because I was going out on the road and there was a car coming.
My other coot is for parts.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Lance103
Trail Rider
  • Total Posts : 75
  • Reward points: 0
  • Joined: 2014/01/03 01:11:37
  • Status: offline
Re: New Guy From West TN Honda 300 2017/01/10 22:59:47 (permalink)
I just had too see what this coot thing was lmao I have to have one now

"If I can't buy it for $1000 or less and fix it up, I don't want it"
1988 Fourtrax 300 4x4 $900
1994 Fourtrax 300 4x4 $460
1999 Foreman 450 4x4 $800
Rebel Redneck
Mud Bogger
  • Total Posts : 191
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/01/10 23:08:47 (permalink)
https://m.youtube.com/watch?v=zNTNc5-yfu4

Here is a old video my dad had of me mudding. If y'all want I can get some pics Tomorrow for your viewing pleasure

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Page: << < ..678910.. > >> Showing page 6 of 12
Jump to:
© 2017 APG vNext Commercial Version 5.5