AnsweredHot!New Guy From West TN Honda 300

Page: < 12345.. > >> Showing page 4 of 13
Author
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
2016/09/10 08:01:58 (permalink)
I guess I won't quit my day job. My funny didn't pan out so well, oh well.

I do have a real question though.
Would the 317 and a 18% gear reduction turn a 28 tire? Thanks

Sent from my XT1585 using Tapatalk

#91
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: 2016/09/10 09:40:03 (permalink)
For the most part it would BUT if you even think you may want more than a 28'' just get a 54% and be done. Depending on the 28 it would struggle in some super thick stuff but for the most part it would be ok. Imo i would never consider gettign a 18%. Because you will want more eventually.

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
#92
00_NUTT
Super Swamper
  • Total Posts : 2254
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/09/10 09:43:32 (permalink)
Yep I had an 18% and now it's in my around the yard hunting bike. Gives it a little more pulling power but I know it's limitations like the Blue 300 said.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#93
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/09/14 21:57:26 (permalink)
thanks for the help guys.
Sorry I haven't been posting much, ive been super busy with work, and playing with the lady friend haha.
I have kinda thought about a 27% gear reduction now so I wont loose so much top end speed and doing maybe a 5 inch lift with some 28 inch mayhems or the like.
What is your opionis guys?
 
thank you

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#94
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: 2016/09/14 22:08:08 (permalink)
Just a fyi there is no 27% for a 300 (that im aware of) the choices are 18 34 and 54%. Just a fyi.
 

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
#95
00_NUTT
Super Swamper
  • Total Posts : 2254
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/09/14 22:13:07 (permalink)
You rarely even hear of the 34 too. 

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#96
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/09/14 22:13:32 (permalink)
Well maybe I heard wrong then. I heard it was 18, 27, then 54. But a 34 wouldn't be to bad.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#97
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: 2016/09/14 22:18:31 (permalink)
i know the 2 smallest reductions stacked on newer 500 foremans and ranchers are 27.5% but a 34 is the closest for a 300. Think long term when you do any of this, if you even think you may want to go bigger one day just get a 54% because the cost of reductions isnt cheap unless you build your own like me wich that alone is a pita to find the correct gears and other stuff. a 34% is ok for 28s or 29.5 skinnys personally i would like to point out that these are honda 300s, they arent the best trail machiens anyway, so low and slow is the name of the game for these old things.

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
#98
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: 2016/09/20 08:22:43 (permalink)
34% is avalable just more expensive than 54%
https://youtu.be/-wP553_jX2Q
317cc with 18% reduction 30 inch xxls
bike struggles but will pull tires.
we sold 18% soon after this video and went 54%


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
#99
00_NUTT
Super Swamper
  • Total Posts : 2254
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/09/20 09:12:40 (permalink)
That 300 looked to be getting it pretty good with the 18%.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
lowbudget
Trail Rider
  • Total Posts : 74
  • Reward points: 0
  • Joined: 2013/11/18 10:04:58
  • Status: offline
Re: 2016/09/20 09:15:07 (permalink)
I thought that it was turning them pretty well for the conditions as well. I'd be happy with that kind of performance out of a 317 and 18%.
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/09/20 09:18:14 (permalink)
That looks like it's doing pretty good for what it is. Definitely strong bike.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
BridelessRacing
Respected Member
  • Total Posts : 6083
  • Reward points: 0
  • Joined: 2006/02/23 19:04:57
  • Location: start La
  • Status: offline
Re: 2016/09/22 15:28:59 (permalink)
a stock motor with a 54% is still a lot stronger than a 317cc with a 18%
just a FYI
 


2009 Yamaha griz eps project underway
http://forum.highlifter.com/m4888660.aspx
Don Oglesby on facebook

http://forum.highlifter.com/hooptie-3-m4910341.aspx
usefull
http://forum.highlifter.com/lil-300-build-for-neighbors-kid-m4662713.aspx
http://forum.highlifter.com/Marengo-upgrades-for-the-88-300-honda-m4746992.aspx
[link=http://forum.highlifter.com/kids-tire-true-mud-tire
420 gr
[link=http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-install-info&m=3935365&high=420+gear+reduction+install&mpage=1]http://forum.highlifter.com/tm.aspx?Honda-420-secondary-gear-reduction-i
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/09/22 23:19:00 (permalink)
Well I'm starting to think I only want to lift the bike 4-5 inches and still have some top end.
But the build is going to be on hold for a while anyway. Having to put a engine in my truck so that is taking my time and funding.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2254
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/09/24 08:24:25 (permalink)
Man that sucks but you gotta have your wheels so you can make the dough to play!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/12/09 10:19:30 (permalink)
Hey everyone.
Well here is the jist.
Truck is done and it's back to bike time. The red 300 needs a rebuild, top end is shot smoking and clacking. I just bought another 300. A 92 300 4x4. It already has the 54 gear reduction and is kinda rough. I bought the bike, and the deal was I had to take the parts. 2 frames, 2 extra motors one runs other has side cover off, 2 rear diff's both need rebuild if possible, shocks, racks, wiring harness, cable sets, a tank, seats, enough stuff to fill a 12 ft utility trailer up front to back. So now the plan is this. Build the 92 for bashing and the 93 back stock motor and use for hunting.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
bcom
Mud Pro
  • Total Posts : 1997
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: 2016/12/09 12:09:01 (permalink)
Im not speaking to you

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2254
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/12/09 13:58:38 (permalink)
well if the price wasn't to high then id say you made a deal.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/12/09 16:14:04 (permalink)
800 for everything. Bike runs great been riding it around q little today.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2254
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/12/09 18:35:01 (permalink)
Dude that was a good score. Just the 54 would be half that.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/12/09 18:36:24 (permalink)
Thanks.
That's why I bought it. I have a shifter problem to fix but that's about it other than cosmetics

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2254
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/12/09 18:37:52 (permalink)
Nice

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/12/09 19:11:51 (permalink)
http://s1378.photobucket.com/user/ChaseCoker1998/library/honda%20fourtrax%20pics?sort=3&page=1
i

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/12/09 19:15:06 (permalink) ☼ Best Answerby 00_NUTT 2016/12/09 21:20:26
http://s1378.photobucket.com/user/ChaseCoker1998/media/honda%20fourtrax%20pics/1481312413952_zpsis58zqci.jpg.html?sort=3&o=0
Let's try this.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2254
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/12/09 21:31:37 (permalink) ☄ Helpfulby Rebel Redneck 2016/12/09 21:33:42
You got a little herd now!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/12/09 21:33:35 (permalink)
Yep.
A red 93, the basher 92, 2 parts ones, may end up with a third, then there is my 74 cj jeep, a coot, a parts coot, a argo and also a 185s 3 wheeler. Lots of crap to drive lol

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2254
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/12/09 23:07:57 (permalink) ☄ Helpfulby Rebel Redneck 2016/12/10 06:26:18
Sounds like me. 3 300's that's all in project mode, 2 parts 300's, 2 xr100r' s, Bayou 220, drift trike and the atc 70. Sold my 64 international scout . That's the one thing I want is an Argo. Seen one a while back on the cheap I missed by 15 minutes. I will find one one day in my price range that is!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/12/12 00:22:44 (permalink)
Sounds like a nice herd.

I heard of a bike called the hondagade. It had 300ex plastic on it? A buddy of mine has a set of 400ex plastics collecting dust I was thinking about putting on the basher 300. It will definitely clear the 30 mambas I want to get.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: 2016/12/12 07:12:26 (permalink)
The real honda gade was jamie watts' build and it had 400ex plastics on it and a custom lift with 32.5 outlaws and a 380 big bore. That bike has been sold sadly but ti still was a impressive bike. Someone has put 300ex plastics on it once or twice, 700x plastics, and someone somewhere put 250r plastics on one. But the real one was jamies and its gone now.

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/12/12 10:57:20 (permalink)
Ok.
I don't plan on doing a big bore in this bike since it hase the GR but I am thinking the 400ex plastic would look cool. Not sure if i want laws thinking about mamba's

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Page: < 12345.. > >> Showing page 4 of 13
Jump to:
© 2017 APG vNext Commercial Version 5.5