AnsweredHot!New Guy From West TN Honda 300

Page: < 12345.. > >> Showing page 2 of 13
Author
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: 2016/08/18 22:53:38 (permalink)
its techinically got 5 more* but the shocks are maxed now so it wont go more than 40 39* is ride height
 

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
#31
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: 2016/08/18 22:54:50 (permalink)
pull the swing arm off
 

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
#32
00_NUTT
Super Swamper
  • Total Posts : 2386
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/08/18 22:59:02 (permalink)
What he said. Also there is a  little spring at the bottom of the shaft. Keep it. Sometimes your shaft will click on your extended drive shaft if it isn't just right. So the spring helps keep the shaft up tight in the u joint. Just some fyi.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#33
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/08/18 23:03:40 (permalink)
Ok. Thanks blue.
Thanks nutt.

I can't pull it out the top? I thought about pulling it when I pull the engine out

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#34
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: 2016/08/18 23:08:56 (permalink)
you can if the engine is out

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
#35
00_NUTT
Super Swamper
  • Total Posts : 2386
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/08/18 23:09:17 (permalink)
I never had the problem of my shaft not coming out the bottom. Now the u joint will not come out the bottom.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#36
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: 2016/08/18 23:12:37 (permalink)
i was refering to as a whole piece

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
#37
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/08/19 13:27:32 (permalink)
Thanks guys.
I finished cutting down the brake panel and pressed in the new sealed bearing and a seal. I started to cut down a different drum I had laying around all I have to do is clean up the burr's, with the grinder.

I think I will probably build my own gear reduction. What gears will I need? Thanks

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#38
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2016/08/19 19:56:34 (permalink)





Not bad for using a porta band, and a grinder. Have to pick up a contactor for the big lathe, my small lathe wouldn't have held up to turning either drum.

Sent from my XT1585 using Tapatalk

#39
00_NUTT
Super Swamper
  • Total Posts : 2386
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/19 20:54:52 (permalink)
Looks good homie!!!! Gear reduction gears are a big secret on here, shhhhhhhhhhhhhh!!!!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#40
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/19 21:26:57 (permalink)
Thanks nutt.
I am going to try and get that stuff installed tomorrow if I get time. I'm kinda hoping it will rain because if it doesn't I'm going to be installing a ramp on a house lol. Built the ramp and part of the hand rail this evening.

So tomorrow will hopefully be install the brake delete and maybe stretch the swing arm and get the new shocks installed

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#41
00_NUTT
Super Swamper
  • Total Posts : 2386
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/19 21:31:52 (permalink)
Sweet!!!! My weekend is shot as I'm going pull sheetrock out of a friend's house that got flooded. It's all good though cause he's got my back so I got his. I'm ready to put my bike back together but it's always something that comes up.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#42
00_NUTT
Super Swamper
  • Total Posts : 2386
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/19 21:34:00 (permalink)

 
Here's my swing arm with a 350D rear axle to give you some ideas.
 

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#43
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/19 21:36:33 (permalink)
I know all about helping out friends and family.

The ramp is for my step grandfather/ maybe one day step father in law, (He got a new girlfriend who had a daughter from a previous marriage who I now date. That's how we roll in the backwoods), he is probably going to have back surgery because of some disk.
post edited by Rebel Redneck - 2016/08/19 21:39:40

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#44
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/19 21:41:32 (permalink)
00_NUTT

 
Here's my swing arm with a 350D rear axle to give you some ideas.
 


Great looking set up.
I think I will be buying a pipe bender soon

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#45
00_NUTT
Super Swamper
  • Total Posts : 2386
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/19 21:45:17 (permalink)
I hear you brother. That surgery shouldn't be bad depending on what part of the spine. I guarantee that he will feel like a new man as long as it's a good surgeon!!!! Seen many people have disk replaced and trimmed that made a night and day difference. People use to stay away from back surgery cause usually they went home worse than what they were before. The technology is simply amazing. I work with a lot of surgeons so in get to see all the latest and greatest parts.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#46
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/19 21:48:13 (permalink)
They said that he has some bone spurs and a pinched nerve because of compressed disk. Talking about he will be down from work for 6-8 months I think.
They did say that one of those inversion tables would help if he didn't want surgery

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#47
00_NUTT
Super Swamper
  • Total Posts : 2386
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/19 22:14:59 (permalink)
He should recover fine. My brother had three crushed and two bulging. Had surgery and was about normal in six weeks.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#48
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
2016/08/20 13:42:34 (permalink)
Ok. Cool.
Glad your bro recovered quickly

Sent from my XT1585 using Tapatalk


#49
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2016/08/20 13:43:54 (permalink)

Started with this here.

It became this

And now it's all purdy

Sent from my XT1585 using Tapatalk

#50
00_NUTT
Super Swamper
  • Total Posts : 2386
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/20 17:27:52 (permalink)
Dang that looks sexay!!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#51
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/20 18:12:11 (permalink)
Thanks
It's definitely been an adventure today. I think I have used every cuss word I've ever hand few i probably made up lol.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#52
00_NUTT
Super Swamper
  • Total Posts : 2386
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2016/08/20 19:47:04 (permalink) ☄ Helpfulby Rebel Redneck 2016/08/26 19:57:13
Hahahahahahahahahahahahahahahahahahahaha

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#53
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2016/08/20 21:16:46 (permalink)









Sent from my XT1585 using Tapatalk

#54
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
2016/08/20 21:21:11 (permalink)
6 inches of stretch, rear brake delete with new bearing and seal, new to me shock from a 400 ex, with custom brackets. I would definitely remove the arm from the bike next time. Since my buddy has a parts bike with a good swing arm I may get it and stretch then swap it in to get rid of this one.

Sent from my XT1585 using Tapatalk

#55
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: 2016/08/20 22:39:48 (permalink)
A 6'' stretch will hardly be enough stretch to use a 6-8'' lift on unless you let your axle angles be really low. looks good though. I have 400ex rear shock on that red one of mine. How stiff is the 400ex shock with the 6'' stretch anyway? For me right now its like a board for suspension on my bike but its a super stiff shock anyway.
 

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
#56
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2016/08/20 22:47:04 (permalink)
It is better than the 2 inch stretch I thought about doing. I was going to go 8 but settled on 6 to start with. I will probably build another swing arm later on with more stretch if needed. This is my first build of a Honda fourtrax for deep mud and water so it's kinda trial and error.

The shock is kinda stiff but I haven't really messed with it a lot. I got done with the bike about 8 tonight so I will ride it some tomorrow and see. Also that shock has valve stem made into it so I can air it up harder or let it down some. I don't know how it's set right now since I haven't messed it yet.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
#57
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: 2016/08/20 23:03:20 (permalink)
I never noticed the stem i knew it had some sort of adjustment. Just for starters the 6'' will be fine.

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
#58
Theblue300
Mud Pro
  • Total Posts : 1087
  • Reward points: 0
  • Joined: 2013/04/14 16:00:05
  • Location: Nun Ya Business
  • Status: offline
Re: 2016/08/20 23:05:20 (permalink)
Another note too, the shock mostlikely has nitrogen in it but you could put some air in it, you might just have to release so or put for in over time from the heating and contracting of summer and winter becaus enitrogen is supposed to be more stable in hot in cold vs air.
 
 

95 Honda 300 Fourtrax-big red rear, 2 inch snorkel, 6 inch lift, 8 inch stretch, 3 inch body lift, 32 silverbacks, locker, M4 motorcycle exhaust, 424, 54% reduction, EPI Economy, 
 
 
380, 450 clutch, 350D clutch cover all waiting to be installed.
 
88 honda 300 frame- 350d motor with a 69% reduction, small lift and 31 wides, dual 2.5'' glasspacks, 3.75'' body lift, locker, 450 foreman clutch still dont run
 
98 honda 300 4x4- all stock for now might get 450 gears and a 317 someday.
 
#59
00_NUTT
Super Swamper
  • Total Posts : 2386
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2016/08/21 09:32:50 (permalink)
Making progress homie!!!!!!! Now to get the front done. What did you do to stretch your drive shaft?

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#60
Page: < 12345.. > >> Showing page 2 of 13
Jump to:
© 2017 APG vNext Commercial Version 5.5