AnsweredHot!New Guy From West TN Honda 300

Page: << < ..111213 > Showing page 12 of 13
Author
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/04/18 15:53:25 (permalink)
Well I have made some progress. I built a different carburetor for it and now it runs great. The kick start is acting up for some reason, I picked up all the pipe for a new snorkel set up, gonna be pvc instead of that flexy line. Got a camouflage seat cover, need to charge the battery and take the winch off since it's now dead.
The little 250 still running great, the 350D I bought is still dead probably gonna chop it up and part out, and use the rear diff on basher, and stock 300 is washed and in the barn waiting to be torn down for new top end.
Always something for me to fix around here

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2017/04/18 17:02:42 (permalink)
What's the kick start doing?

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/04/19 09:41:22 (permalink)
Sometimes if I try to kick it real hard it will grab till about half way down then slip, then you can hear something in there spinning and it will catch once it slows down. If I just kinda kick it over not real hard it will grab just like always

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
doveman1
Super Swamper
  • Total Posts : 2548
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: 2017/04/19 13:52:55 (permalink)
Don't kick it so dam hard... bam problem solved!

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/04/19 13:54:31 (permalink)
Haha. I usually run the electric start lol

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
umbromel
Grass Hog
  • Total Posts : 3
  • Reward points: 0
  • Joined: 2017/04/21 07:49:51
  • Status: offline
Re: 2017/04/23 16:05:39 (permalink)
Rebel Redneck
Haha. I usually run the electric start lol

I usually do the same as you :P lol :P
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/04/24 20:51:25 (permalink)
Yeah I charged the battery back up and I ordered a one way bearing for it

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/05/11 19:43:21 (permalink)
Ok everyone im sorry for not keeping y'all updated and being a good member.
I changed the bearing so it works fine now, I had to reset my clutch a little to get it to shift again, and I have Installed a nitrous oxide system, rebuilt a stock Honda carburetor for it, new vent for it, the carburetor vent and crank vent are now in the air box, then I have rebuilt the entire snorkel system. I bought the tube that goes from the air box to the main frame tube since it's a gen 1. Then I cut up part of the stock opening and welded a pipe into it and came down and ran up with dual snorkels. I haven't measured the over all height yet but it's tall. And painted them black.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2017/05/11 19:47:46 (permalink)
Here are the pipes. Both flow into the box. I will try to get measurements of the height tomorrow, and pics of the new seat cover. I'm building a stereo box for it also.

Sent from my XT1585 using Tapatalk

00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/11 21:54:16 (permalink)
RIP LITTLE HONDA THAT COULD!!!!
🌫️+💣=💥 ☠️👻☠️👻☠️👻☠️👻☠️

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/11 22:00:42 (permalink)
Haha..so you think I'm gonna blow.it up? It's.one of those mini lots that's for like dirt bikes and stuff

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/11 22:08:41 (permalink)
Hmmmmmmmmmm 🙏

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/11 22:24:01 (permalink)
Haha. I'm sure it will be ok the kit I got is supposed to be for a 250 cc and the 300s are 280 something and the.bottles are the same as c02 for BB pistol. Should be fun

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
doveman1
Super Swamper
  • Total Posts : 2548
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 05:44:28 (permalink)
Put a fire extinguisher on it. You'll need it

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 05:53:28 (permalink)
Halon system!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 08:47:50 (permalink)
I'll probably only use it in the deep water holes.
What's a halon system nutt?

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
doveman1
Super Swamper
  • Total Posts : 2548
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 09:01:19 (permalink)
I'm curious why you need nitrous in a deep water hole?

Halon is a type of extinguisher. Set that sucker up on some lines and as soon as you hit a button it sprays out several nozzles!


Remember there's a lot to know about nitrous. Bottle has to be a certain temperature, can't get to hot or cold, I've seen bottles blow up cause they were inside boxes during the summer. Humidity plays a part in it. Jet size. Timing on engine. I've seen a lot of very experienced racers blow an engine cause they were off just a little bit.

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 09:20:05 (permalink)
Just spray hair spray in it and be done!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2548
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 09:25:19 (permalink)
And when it blows, there will be a big fire ball coming straight to your face out of the snorkel

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 09:46:22 (permalink)
Gives the closest shave you will ever have!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 10:07:16 (permalink)
That sounds like fun!!!!!!
I guess that holan system is llike what I did on my rzr I have a for extinguisher set up to spray the fuel injection and head

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 13:58:49 (permalink)
No you peeing on it is not the same thing!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2548
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 14:11:07 (permalink)
What are your raw horse power gains?

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 14:13:13 (permalink)
50 pound bag of Alpo!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
doveman1
Super Swamper
  • Total Posts : 2548
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 17:34:26 (permalink)
If he's lucky

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 17:52:15 (permalink)
Ok 30 pound bag with the free 3 pounds added!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 21:17:53 (permalink)
I have not tried it yet

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/12 21:55:43 (permalink)
Well what R u waiting for???

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 208
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/13 04:10:39 (permalink)
Finishing all the other crap

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2336
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/05/13 10:13:48 (permalink)
No that's unacceptable!!! We need carnage pic's!!! Piston welded to gas tank type shït!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Page: << < ..111213 > Showing page 12 of 13
Jump to:
© 2017 APG vNext Commercial Version 5.5