AnsweredHot!New Guy From West TN Honda 300

Page: << < ..11 Showing page 11 of 11
Author
00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2017/02/19 14:54:15 (permalink)
Yes I seen that exact gate in some past pics!!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
bcom
Mud Pro
  • Total Posts : 1993
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: 2017/02/19 17:29:50 (permalink)
00_NUTT
Yes I seen that exact gate in some past pics!!!!!


Did you walk by my house or something?

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2017/02/19 20:16:08 (permalink)
I can't tell you. He told me not to say anything!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
2017/02/21 22:19:46 (permalink)
He was a cool uncle for the most part.
Let me watch dirty movies, smoke pot and drink. The not as fun part didn't last to long so I usually did not mind. Plus I had stuff to pass on the fun to so it was cool.
Never understood though why I was not supposed to tell anyone what happened on the fishing trips. Come to think of it we never even fished. Hmmm
Now something is starting to seem fishy about those trips. Hmmmm

Sent from my XT1585 using Tapatalk

Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2017/03/01 21:36:22 (permalink)
Sup people!!!
The basher bike got sunk this past weekend. Just the carb had water it ran in the vent line after it somehow came off.
Oil was clean.

Then today I bought another project
It's an 86 fourtrax 250 2 wheel drive. Only issue is it needs a battery and the carb need cleaning.
Also Mable says hi.


Sent from my XT1585 using Tapatalk

00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/03/01 22:31:56 (permalink)
I seen a 250 like that at my local Honda shop. Dealership bought it back from the owner!!!! All original down to the tires!!! Looks brand new!!! They have it on display on the showroom!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/03/01 22:41:20 (permalink)
She is a little beat up on spots. The fenders have been stitcjed back up on both sides as you can see in the pic and I think those are different rear tires.
But the front's are original and everything works far as I have found. I think the fuse may be blow for the tiny fan that blows on the motor unless it's supposed to kick in by itself. I haven't messed with it much yet. Tomorrow hopefully I can.
Still have to get the basher ready for sunday's ride.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2017/03/03 21:31:28 (permalink)

I changed the oil in the basher bike, added the axle paddle and put a nice clean air filter on it.
I cleaned the carb on the 250 rode it and sliced a tire. I picked a tube up for that and should have it in tomorrow

Sent from my XT1585 using Tapatalk

doveman1
Super Swamper
  • Total Posts : 2481
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: New Guy From West TN Honda 300 2017/03/06 19:35:04 (permalink)
Did you build the paddle? From my experience fabricating, I would put bracing in between each paddle. If not it'll just pull the weld off, stretch the pipe it's welded too, or just bend the paddle. Just trying to save you from having to rebuild it 👍

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/03/06 19:52:10 (permalink)
That's the same thing I was thinking to Doveman!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: New Guy From West TN Honda 300 2017/03/06 19:55:31 (permalink)
Thanks for the input. First paddle I've built. I'm not sure if I want I keep it. It didn't really seem to help much.
When I do a 350d conversion I will do a center paddle and stretch

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
2017/03/07 14:38:45 (permalink)
Hey guys. I'm tired of having a 3 wheel drive bike.
I'm thinking about a highlifer spool locker. I've seen the washer trick but I'm not completely sure that's going to work. When I say dig I want this thing to dig.
So which do y'all think?

Sent from my XT1585 using Tapatalk


doveman1
Super Swamper
  • Total Posts : 2481
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: 2017/03/07 15:01:30 (permalink)
I would want a gearless locker! Be able to turn that sucker!

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 


 If you're gonna be dumb you gotta be tough.
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/03/07 15:03:59 (permalink)
Haven't found any of them.
U have one?

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2017/03/07 22:26:16 (permalink)
Dude I have been looking for one for years and no luck but still looking

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/03/07 22:29:41 (permalink)
I'm just going to get a spool and be done with it.
Also I changed the oil again today. I think I will be doing this after every ride. It was nasty and I changed it right before the ride. All my vents are good though

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2017/03/07 22:54:16 (permalink)
Heck same you some money and just put you some big washers in it. Works just as well and it's cheaper.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
New Guy From West TN Honda 300 2017/03/13 10:44:17 (permalink)
Hey guys.
I went and rode yesterday and had a blast. I rode the basher some and the rzr some. I was showing up 10-20k bikes on my POS Honda. Every hole I hit I came out of with no problems on the basher. I ran it extremely hard, held it on the rev limiter a lot.
RZR did good too I don't think I broke anything and it left the ground a lot

I had a blast.

Sent from my XT1585 using Tapatalk

00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: New Guy From West TN Honda 300 2017/03/13 13:01:36 (permalink)
Sweet!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
2017/03/23 16:12:30 (permalink)
Hey guys.
Last weekends ride no bikes, I took the RZR. But I did get the oil changed again in the basher, and I put a new starter solenoid on so now the push button start works fine.

I wish I could lift it a little more but I am maxed out on it right now. I'm still not clearing a bucket which I'm a little sad about but oh well it will do for now until I do a bigger lift.

Also I bought another bike this week. A 350d that is dead, the timing chain is shot the valves don't even try. So I am still trying to decide if I want to fix it or just part it out. I may use the diff in the basher since I'm currently running a stock 300 diff.
I busted the skid plate on my RZR too, had a big split in it so I patched that up for now. It will hold for a while.

I'm still getting a little water I. Something once in a while on the basher that causes it to shut down. Not sure yet probably the carb vent again. Oh well no big deal. I looked everything over the other day and I think it's ready to go again. Might run it off in my pond and leave it for a while just let it run and see if it dies.

Sent from my XT1585 using Tapatalk

00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2017/03/23 20:23:56 (permalink)
Part out the 350 and put the rear diff under your 300. Will be the best thing you ever done!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/03/23 20:55:03 (permalink)
That is probably what I will end up doing.
Any motor parts to swap into the 300?

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2017/03/23 21:18:28 (permalink)
There is but machining will be required on the crank. Also a special cam will have to be ordered as it spins backwards in the 300 compared to one in the 350d.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/03/23 21:19:52 (permalink)
Yeah I knew there was a case swap for the oil cooler lines and the cam didn't swap. Wonder if the piston would work for a big bore kit f some kind

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2017/03/23 21:41:33 (permalink)
The side case has to be welded and the lever thats behind it and it's little bushing has to go with it. The jug, head, crank and piston all has to be used together plus the custom cam. Otherwise one will not work without the others.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/03/23 21:44:57 (permalink)
Well poop. Time to go on the chopping block I guess haha.

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2017/03/23 23:15:58 (permalink)
You can probably sell the head, jug, cam, crank and a few other parts with no problem.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
Re: 2017/03/23 23:19:18 (permalink)
Yeah I see carburetor for 140+

Im Chase. 
Current garage:
93 Honda fourtrax 300 4x4, snorkel, 2 inch lift, mudlites (needs rebuild)
92 honda fourtrax 300 "The Basher" 54%GR, 3inch lift, 30in mamba lites, lots of custom work.
2015 Polaris rzr 900 trail edition.
74 cj 5 Jeep. 3 inch lift and 33s.
70s coot utv.
86 Chevy k30 flatbed daily driver and also weekend wheeler.
00_NUTT
Super Swamper
  • Total Posts : 2110
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: 2017/03/23 23:26:29 (permalink)
Yup

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
Rebel Redneck
Mud Bogger
  • Total Posts : 186
  • Reward points: 0
  • Joined: 2016/08/16 21:13:33
  • Location: West TN, outside of Milan
  • Status: offline
2017/03/27 23:08:48 (permalink)
Well this Sunday sucked.
The basher crapped its self a couple times. Air box full of gas, shut off at random a few times, shut down and for 3 hrs by myself in the woods I worked on it and couldn't get it going. Some guys that found me towed me to the road then it started running. It's on the trailer in the yard still I haven't done much to it yet. I am gonna do a little to it before the next run. Probably be rocking the RZR for a while

Sent from my XT1585 using Tapatalk

Page: << < ..11 Showing page 11 of 11
Jump to:
© 2017 APG vNext Commercial Version 5.5