AnsweredHot!Locating Polaris Sportsman 850 high lifter bumper

Page: 12 > Showing page 1 of 2
Author
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
2018/01/28 15:01:30 (permalink)

Locating Polaris Sportsman 850 high lifter bumper

I have been trying to find this winch bumper and I have not had any luck finding it... Anyone know where I can find one?
Thanks!

Attached Image(s)

#1
BUSHHOG
Employee
  • Total Posts : 7694
  • Reward points: 0
  • Joined: 2003/06/25 12:00:00
  • Location: SHREVEPORT,LA.
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/01/29 08:10:33 (permalink) ☼ Best Answerby 2016_hi_lyft 2018/01/29 11:08:11
That is a "Pure Polaris" bumper that can be ordered from any Polaris dealership.

Dan Doughty
#2
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/01/29 11:08:52 (permalink)
Thanks! I was trying to find one online and was not able to locate one. 
#3
doveman1
Super Swamper
  • Total Posts : 2635
  • Reward points: 0
  • Joined: 2008/06/11 09:51:16
  • Location: Marshall Texas
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/06 08:17:57 (permalink)
May check your local shops. They might have a take off. Or post around on Facebook and see if someone has one laying around that they took off.

Green 2015 Grizzly 700
14in Sti Hd wheels, 29.5 OL2's 
2in HL lift
N2deep battery relocation
Wild boar radiator relocation
Atv trail tunes Kicker twin tubes
JBS extreme sheave with purple secondary spring


 If you're gonna be dumb you gotta be tough.
#4
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/07 09:11:04 (permalink)
I ended up checking with the local dealer and the 4500# superwinch that I already have will not fit behind it. So, Looks like i am going to build one based off the concept of this one and go from there. Thanks for the input though! I do appreciate it! I will post a few pics when I get it finished.
#5
bcom
Super Swamper
  • Total Posts : 2033
  • Reward points: 0
  • Joined: 2008/08/13 10:56:05
  • Location: Ohio
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/08 14:26:22 (permalink)
Maybe Dan can tell you what winch is suppose to be behind this bumper? Or whats the max size it can handle?

 
current ride--a derelict shopping cart
Happy terrapin with koozies!!
#6
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/13 15:14:50 (permalink)
Thanks! I am well under way with the build, just waiting for the pipe notcher and a day off to work on it! 
#7
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/21 15:30:53 (permalink)

This is what I have going so far. I am going to get a light bar mounted on the top of it with a hoop over it to keep it from getting beat up. 
#8
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/21 15:45:01 (permalink)

#9
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/21 15:46:02 (permalink)

#10
00_NUTT
Moderator
  • Total Posts : 2678
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/21 19:15:44 (permalink)
Dude looking like a boss and I bet a lot easier on the pocket book!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#11
00_NUTT
Moderator
  • Total Posts : 2678
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/21 19:17:17 (permalink)
Hey post a pic up of your pipe notcher!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#12
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/22 14:47:48 (permalink)
If you count the $170 for the pro-tools racer notcher, I have about $200 in it so far!
post edited by 2016_hi_lyft - 2018/02/22 14:49:47
#13
00_NUTT
Moderator
  • Total Posts : 2678
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/22 14:54:57 (permalink)
That's not bad at all. Plus now you have a tool for future projects!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#14
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/22 14:58:45 (permalink)
https://www.polyperformance.com/pro-tools-racer-tube-and-pipe-notcher-n-500?utm_source=google&utm_medium=cse&utm_term=PRT-N-500&gclid=EAIaIQobChMI2ODXhrO62QIVA3ZeCh09xwtwEAQYASABEgLIkPD_BwE

It works really good with the drill in low speed and lots of oil
#15
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/22 15:00:41 (permalink)
As soon as I get the front done, I am gonna do rack extension on the back and a rear bumper with a tiger tail.
#16
00_NUTT
Moderator
  • Total Posts : 2678
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/22 15:10:33 (permalink)
Nice. I been thinking about a tiger tail as well.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#17
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/28 08:12:40 (permalink)

This is what I have going on this far, but the next photo is my plan... is it too much?
#18
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/28 08:15:39 (permalink)

I am not looking to go overboard, just looking for the right amount of "WOW." Otherwise I may just weld a small and simple light mount to the top horizontal pipe. 
#19
00_NUTT
Moderator
  • Total Posts : 2678
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/28 14:24:59 (permalink)
Pictures not showing

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#20
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/28 15:40:32 (permalink)

#21
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/02/28 15:42:01 (permalink)

This is the idea I am looking at... 
#22
00_NUTT
Moderator
  • Total Posts : 2678
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/03/02 06:33:42 (permalink)
Oh yea!!!! Next thing you know all your buddies are gonna want you to build them one now!!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#23
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/03/02 08:14:03 (permalink)
I don't mind, I kinda like these projects. Plus I am always open to making a buck!
#24
00_NUTT
Moderator
  • Total Posts : 2678
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/03/02 08:50:04 (permalink)
True that!!! I was gonna say that but didn't know if you were into doing side projects for mad money. I know savant machine shop also known as strong built. He started under his carport making stick stoppers and floor boards. Now his place is huge!!!

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#25
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/03/02 09:47:29 (permalink)
The hardest part about making custom bumpers is having the time to dedicate to them and needing the quad for all of the fab work. Otherwise, I am always open to these kinds of projects!
#26
00_NUTT
Moderator
  • Total Posts : 2678
  • Reward points: 0
  • Joined: 2014/02/11 10:12:30
  • Location: Oberlin, La
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/03/02 23:59:09 (permalink)
My buddy Whitney builds many of custom lifts. Number one thing to have is a jig table. He can turn out a full lift a day.

00_NUTT
1997 Honda 300 4x4
Head Ported and Polished
317 Kit
Big Red Cam
Clutch Kit
SuperTrapp IDS2 Exhaust
K&N Filter
Carb Kit
32" Interco Interforce II's
16" MSA M30 Trottles
Snorkled 
54% gear reduction
Honda 350 rear axle assm.

6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

SON'S BIKE
1998 Honda 300 2x4
6" BPC LIft with some sick a-arms
420 spindles and disk brakes
29.5" OL2'S
14" MSA M26 Vibes
 
Upcoming
4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
54% Gear Reduction
 
#27
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/03/03 07:40:30 (permalink)
Yea, if I did start doing bumpers, I would def need a jig table, but if you start mass producing them, they are no longer custom. But if someone sees a bumper or some other accessories I have made and want one for theirs, I would be able to just copy mine. Would be a bit tougher to do the one off customs on different brands and models.
#28
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/03/19 15:01:16 (permalink)

#29
85o h0 SporTsMan
Puddle Jumper
  • Total Posts : 33
  • Reward points: 0
  • Joined: 2018/01/28 14:23:08
  • Location: Omaha, NE
  • Status: offline
Re: Locating Polaris Sportsman 850 high lifter bumper 2018/03/19 15:02:57 (permalink)

Light bar mounted on 2016 Sportsman 850 High Lifter.
#30
Page: 12 > Showing page 1 of 2
Jump to:
© 2018 APG vNext Commercial Version 5.5