Hot!Honda 300 Ball Joint Plates and Heims

Author
JKemme Sends
Grass Hog
  • Total Posts : 4
  • Reward points: 0
  • Joined: 2020/02/03 15:28:54
  • Status: offline
2020/02/21 10:44:33 (permalink)

Honda 300 Ball Joint Plates and Heims

-Hi I'm new to the forum and I want to cut my own balljoint pads. I have a waterjet available but I need to know the dimensions of everything for a Foreman 500 knuckle.
- Also need to know basically everything on the heim joint department. I'm building my whole lift and don't know what is needed when it comes to heim joints. 
- All comments are appreciated.
#1

6 Replies Related Threads

    00_NUTT
    Moderator
    • Total Posts : 2818
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Honda 300 Ball Joint Plates and Heims 2020/02/21 18:35:24 (permalink)
    Look up Whitney lagars on bookface. He's from Minden la area.

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
    #2
    00_NUTT
    Moderator
    • Total Posts : 2818
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Honda 300 Ball Joint Plates and Heims 2020/02/21 18:35:54 (permalink)
    Where you from my friend?

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
    #3
    JKemme Sends
    Grass Hog
    • Total Posts : 4
    • Reward points: 0
    • Joined: 2020/02/03 15:28:54
    • Status: offline
    Honda 300 Ball Joint Plates and Heims 2020/02/22 16:40:43 (permalink)
    00_NUTT

    Where you from my friend?




    Effingham Illinois


    Sent from my iPhone using Tapatalk
    #4
    JKemme Sends
    Grass Hog
    • Total Posts : 4
    • Reward points: 0
    • Joined: 2020/02/03 15:28:54
    • Status: offline
    Honda 300 Ball Joint Plates and Heims 2020/02/22 16:42:49 (permalink)
    What does Whitney Lagars have on Facebook?


    Sent from my iPhone using Tapatalk
    #5
    00_NUTT
    Moderator
    • Total Posts : 2818
    • Reward points: 0
    • Joined: 2014/02/11 10:12:30
    • Location: Oberlin, La
    • Status: offline
    Re: Honda 300 Ball Joint Plates and Heims 2020/02/22 16:56:09 (permalink)
    Whitney builds numerous big lifts and has made some sick 300's. All my lift was custom built from the frame to a-arms to the swing arm and all powder coated out. He has a wealth of knowledge.

    00_NUTT
    1997 Honda 300 4x4
    Head Ported and Polished
    317 Kit
    Big Red Cam
    Clutch Kit
    SuperTrapp IDS2 Exhaust
    K&N Filter
    Carb Kit
    32" Interco Interforce II's
    16" MSA M30 Trottles
    Snorkled 
    54% gear reduction
    Honda 350 rear axle assm.

    6" BPC CUSTOM LIFT WITH 8" STRETCH AND 3" BODY LIFT OLD 300 LOOKING GOOD AS EVER THANKS TO WHITNEY!!!!!

    SON'S BIKE
    1998 Honda 300 2x4
    6" BPC LIft with some sick a-arms
    420 spindles and disk brakes
    29.5" OL2'S
    14" MSA M26 Vibes
     
    Upcoming
    4x4 Frame and Motor that's here now just got to get to work on the swap over!!!
    54% Gear Reduction
    #6
    JKemme Sends
    Grass Hog
    • Total Posts : 4
    • Reward points: 0
    • Joined: 2020/02/03 15:28:54
    • Status: offline
    Honda 300 Ball Joint Plates and Heims 2020/02/22 18:03:32 (permalink)
    00_NUTT

    Whitney builds numerous big lifts and has made some sick 300's. All my lift was custom built from the frame to a-arms to the swing arm and all powder coated out. He has a wealth of knowledge.




    Ok thanks


    Sent from my iPhone using Tapatalk
    #7
    Jump to:
    © 2020 APG vNext Commercial Version 5.5