Fastest street driven vehicle on HL!

We have never run the car on a 1/4 mile track but an 1/8 its getting 4.83 on just motor no turdo, no nothing just motor, now it is set up for the juice and has a 800 hp fogger system on it but we have never used it

gizzlyking0305


We have never run the car on a 1/4 mile track but an 1/8 its getting 4.83 on just motor no turdo, no nothing just motor, now it is set up for the juice and has a 800 hp fogger system on it but we have never used it

will you run it on the street? if so i got ya

I will drive it on the street but not race it on the street

I geuss i should play too since i started the thread. Its a 99 T/A, 408 solid roller with a little go-go juice. Shes been 9.81 @ 137mph and i still run around town in it. It should run a little quiker but its a heavy arse vertible...

TEAM WCA RACING   #13  Joe Rumfolo

07' Brute Force
08' Renegade 800X
06' Outlander XT 800 
07' Outlander Max XT 800
06' Rincon 
08' Mega Cab 3500 
02' Ram 3500 4x4 
07' Jeep SRT8 Cherokee 
02' Trans Am 

3TV


Some of you folks have some real serious street machines.  Very impressive. 

I've got a mostly stock 2008 Challenger, with long tube headers, high flow cats, and a Magnaflow comp series exhaust.  Here is a video of a top speed run.  At the very very end of the video the car had hit its top speed of 165 mph.

Challenger SRT8

Has anyone gone over 165 mph on the street?

153 GPS in a rcsb 5.3 chevy wtih factory drive train, stock wheel, stock tire, and an idiot (me) driving.  I wouldnt do it agian in that truck setup that way!  Glad im still alive

153km/h??? they shut off around 98mph

If its tuned it wouldnt shut off but agreed stock it shuts off at 98mph.

2008 Yamaha Raptor 700R
Dynatek FI Controller,
GYTR Intake,
HMF Sport Full Exhaust,
PowerMadd Hand Guards,
BlingStar bumper,
UM Nerf Bars.
Pro-Tek air box lid
2002 Prairie 650
Snorkeled, Radiator Relocated,
Gorillas,
2" Lift,
HL Springs,
Pen Lock,
30" mudlites,
EPI yellow and red, 
DynaTek CDI
K&N,
Jetted,
1.5" wheel spacers, 
Big Gun Slip On.
2007 Polaris Outlaw 500 IRS (Wife's)
Razr's F/R
ProCom CDI
1988 Honda trx250r

refer to the first page, same silverado that hit 11.9 1/4 mile. 

thecar

 

the motor


the intake


Its just a mild 408.  12.5:1, Meaux Stage III ls6s, FMS 259/267 .705/.702 solid roller, T&D 1.7s, FMS ported LSX intake plumbed w/ the NX direct port w/ the 300 pills, Rossler TH400 w/  ATI converter setup for a shot.   A/C and P/S still on the car.  Gunna outfit it w/ a 9" aluminum center section, 40 spline axles, spool, w/ some 3.89s and a 29" tire. 

Hoping for some mid/low 10 second hits on motor and I'll pill it till I kill it if I can't get 9.0s.  It should COME ALIVE on the kit... its not setup to run on motor @ all.    Should be a BEAST on the street w/ the nitrous converter. 

Team Outta Kontrol
Little Bit of Wild Boar Love Thrown In The Mix

I'M JUST HONEST...

www.myspace.com/joshua99ta

DWH 11 LOST BUT NEVER FORGOTTEN

Josh, That is a sexy set up you got there, she outta roll out!

TEAM WCA RACING   #13  Joe Rumfolo

07' Brute Force
08' Renegade 800X
06' Outlander XT 800 
07' Outlander Max XT 800
06' Rincon 
08' Mega Cab 3500 
02' Ram 3500 4x4 
07' Jeep SRT8 Cherokee 
02' Trans Am 

josh... 8.80 should be no problem with a little tweaking on the suspension

yessir T she should be pretty impressive...

Team Outta Kontrol
Little Bit of Wild Boar Love Thrown In The Mix

I'M JUST HONEST...

www.myspace.com/joshua99ta

DWH 11 LOST BUT NEVER FORGOTTEN

onebadrubi

3TV


Some of you folks have some real serious street machines.  Very impressive. 

I've got a mostly stock 2008 Challenger, with long tube headers, high flow cats, and a Magnaflow comp series exhaust.  Here is a video of a top speed run.  At the very very end of the video the car had hit its top speed of 165 mph.

Challenger SRT8

Has anyone gone over 165 mph on the street?

153 GPS in a rcsb 5.3 chevy wtih factory drive train, stock wheel, stock tire, and an idiot (me) driving.  I wouldnt do it agian in that truck setup that way!  Glad im still alive

 
You must have a steel driveshaft because I heard the aluminum ones will explode at 130 or so.  and you must have had good (stock type) tires on it because I couldnt see the OEM goodyears/Firestones going that fast.  any sub-110 rated tire going that fast would scare me.
 
Thats crazy.  Ive hit about 105-110 in my Z before and let out because I didnt wanna die.  Im sure the smaller 2wd rcsb handles much better tho.

My Chevelle runs 9.20's on race gas.
Its a street legal car as well.

^^ with A/C?!? tehehehe

Team Outta Kontrol
Little Bit of Wild Boar Love Thrown In The Mix

I'M JUST HONEST...

www.myspace.com/joshua99ta

DWH 11 LOST BUT NEVER FORGOTTEN

josh, what does a set up like that cost? pm me. im just hinking bout a new hobby and wondering if i could do that for around the same price as racing bikes........

1988 Honda 110 3wheeler SOLD
1987 Honda 185S 3wheeler
1985 Honda Big Red SOLD
1989 Kawasaki Bayou 2x4 SOLD
1989 Kawasaki Bayou 4x4 Still Got
2004 Honda foreman 450 SOLD
2005 Honda Rubicon SOLD  
2007 Can Am Outtie 800 SOLD
2008 Can Am Outtie 800 SOLD
2008 Polaris RZR 800 Turbo SOLD
2009 Can Am Limited 800R FOR SALE (DEAL PENDING) 
2011 CAN-AM COMMANDER 1000XT ORDERED        

every time i get into reading threads about lightnings or F150 harley editions, it just makes me drool.........

i had a "deal" worked for a lightning but the guy backed out...... i was wanting to trade my jacked up F250 ( http://www.team-mudd-racing.com/team-mudd-evolution/DSC05274.JPG ) for a lightning...... checked each others trucks out, both mechanically sound, deal was looking good, till the guys wife didn't like the ride or climbing in and out of a jacked up F250....DAM........  well it was all good since MY wife said before you jump gun, we do have 4 kids we need to haul around every so often........can't do that with a reg cab lightning....... BUT a F150 harley, yes sir......LOL

it wouldn't be the fastest, but i'd want to make it a good street strip truck.  yall have some good looking/running vehicles!

there used to be a harley truck around Jackson that had a built motor w/ a kenne bell that ran like 11.80s.... they said it was wicked on the street... I went trying to find him for a race a few times but could never find him with my old setup.

Team Outta Kontrol
Little Bit of Wild Boar Love Thrown In The Mix

I'M JUST HONEST...

www.myspace.com/joshua99ta

DWH 11 LOST BUT NEVER FORGOTTEN

she runs low nines in the eighth

Attached Image(s)

^^ thats super fast for that big of a truck!!!!!!!!

Team Outta Kontrol
Little Bit of Wild Boar Love Thrown In The Mix

I'M JUST HONEST...

www.myspace.com/joshua99ta

DWH 11 LOST BUT NEVER FORGOTTEN

TeamMudd


every time i get into reading threads about lightnings or F150 harley editions, it just makes me drool.........

i had a "deal" worked for a lightning but the guy backed out...... i was wanting to trade my jacked up F250 ( http://www.team-mudd-racing.com/team-mudd-evolution/DSC05274.JPG ) for a lightning...... checked each others trucks out, both mechanically sound, deal was looking good, till the guys wife didn't like the ride or climbing in and out of a jacked up F250....DAM........  well it was all good since MY wife said before you jump gun, we do have 4 kids we need to haul around every so often........can't do that with a reg cab lightning....... BUT a F150 harley, yes sir......LOL

it wouldn't be the fastest, but i'd want to make it a good street strip truck.  yall have some good looking/running vehicles!

 
in walthall county, which is just around the corner from me, there is a guy with a 03 harley edition truck that gave me a run for my money one day in my vette. i yeilded onto the highway and he was behind me. the next thing i knew he was beside me and it was on then. keep in mind my vette is not the fastest one out there but its no slouch. i put down close to 450 to the rear wheels. we were dead even until i hit fourth and then he saw my tail lights. but i was very impressed with the truck. finally got around to finding him again and looked at the truck and he had it setup up nicely with a bigger blower and some laughing gas.

2010 Sunset Red Ranger Crew LE W/EPS
28" Zillas on 14" MSA Nukes
2" rubber down lift,half winsheild,extreme bumper
2008 Yamaha YFZ450
2- 1997 Scrambler 400 4x4's(one is for sale) 

I remember the first time I almost got outran by a truck... it was a 94ish silverado w/ a procharger.   man that thing was pretty fast... it was a high 13 second truck.... possibly faster if he would have had a set of slicks or just any decent tire to hook it up.  I'de get him outa the gate and he'de start catching me around 45 and I'de starting pulling off from him around 75-80.  Impressed the heck out of me as a 15 year old kid that had one of the fastest cars around(even though it was stock it was still pretty tuff on the street for around here back in 99-2000)  

Team Outta Kontrol
Little Bit of Wild Boar Love Thrown In The Mix

I'M JUST HONEST...

www.myspace.com/joshua99ta

DWH 11 LOST BUT NEVER FORGOTTEN

At the Byram track, where my truck runs a 9 flat, I was told that a mostly stock Harley Davidson F150 (S/C) ran an 8.3 which is fast for a truck but isnt as impressive as I thought.  If it was tuned it would run a lot better though.

joshua99ta


^^ thats super fast for that big of a truck!!!!!!!!

shes got a BIG motor

I would expect so if it runs 9.0s in the 1/8th in that big hunk of lead!  I'm trying to remember but I believe my duramax ran something like a 9.80 1/8 and a 15.20 1/4.... I'de have to find the slips... its been a while now. 

Team Outta Kontrol
Little Bit of Wild Boar Love Thrown In The Mix

I'M JUST HONEST...

www.myspace.com/joshua99ta

DWH 11 LOST BUT NEVER FORGOTTEN

496 hp @ 28lbs FULLRACE twin scroll fully built sr20



420hp @ 22 psi  KKK turbo stock bottom end sr20




4**hp  fully built ls1  n/a

gimme my ritalin

gmcz71

onebadrubi

3TV


Some of you folks have some real serious street machines.  Very impressive. 

I've got a mostly stock 2008 Challenger, with long tube headers, high flow cats, and a Magnaflow comp series exhaust.  Here is a video of a top speed run.  At the very very end of the video the car had hit its top speed of 165 mph.

Challenger SRT8

Has anyone gone over 165 mph on the street?

153 GPS in a rcsb 5.3 chevy wtih factory drive train, stock wheel, stock tire, and an idiot (me) driving.  I wouldnt do it agian in that truck setup that way!  Glad im still alive

 
You must have a steel driveshaft because I heard the aluminum ones will explode at 130 or so.  and you must have had good (stock type) tires on it because I couldnt see the OEM goodyears/Firestones going that fast.  any sub-110 rated tire going that fast would scare me.
 
Thats crazy.  Ive hit about 105-110 in my Z before and let out because I didnt wanna die.  Im sure the smaller 2wd rcsb handles much better tho.

If you would like to doubt me you can GMC.  I called myself an idiot for doing it, I have video of the truck running the 1/4 mile time.  It was not on the stock goodyears/firestones, but mere stock tire (BFG t/a radial).  I would highly recommend comparing your z71 to something more appropiate then a sub 12 second vehicle.  And to add to it and a reference you shoudl respect, tan327 and myself earned a lot of credit from the tryed and trusted guys over at performancetrucks.net for doing what we did with out two trucks (not doing insane speeds on the freeway). 

summin w/ 28psi full race and making 496hp?!? i dunno what a twin scroll is or anything like that... but 496hp doesnt sound too good.

Team Outta Kontrol
Little Bit of Wild Boar Love Thrown In The Mix

I'M JUST HONEST...

www.myspace.com/joshua99ta

DWH 11 LOST BUT NEVER FORGOTTEN

joshua99ta


summin w/ 28psi full race and making 496hp?!? i dunno what a twin scroll is or anything like that... but 496hp doesnt sound too good.

496hp on a 4 banger in a 2500lb car doesn't sound good?!? Are you on crack?

"Don't take life so seriously, nobody gets out alive anyways"

2007 Suzuki Eiger 4x4 Auto
- Uni Filter
- DynoJet Kit
- Air and CVT Snorkel
- Viper Max 3000 w/ black Amsteel
- Coop 45 Shim Mod  (1mm)
- Port and Polished head
- Head shaved .020"
- 2" HL lift kit
- 28" Titan 589's

"Do work!"

yah

2.0L

couple shots of it throughout this videoo

http://vimeo.com/4623290

http://vimeo.com/4326968

fullrace is brand of the manifold btw

gimme my ritalin